Pro-Touring Control Arms
QA1 52519 pro-touring lower control arms will improve the handling characteristics of any 1967-1969 GM F-Body and 1968-1974 GM X-Body.
- Improves a vehicle suspension geometry to increase overall handling, ride quality, and vehicle stance
- Ultra low friction composite bushings for bind-free motion and superior handling
- Increased positive caster for straight-line stability
- Manufactured using high-strength low alloy steel and an exclusive ball joint housing design that provides one of the lightest designs available at less than 10 lbs. each. The lighter weight will lower a vehicle's unsprung weight improving performance.
- Utilizes QA1 Ultimate low-friction ball joints provide bind-free movement and feature low-maintenance, strengthened construction, rebuildable design, and an integrated dust boot for long-term service.
- 1 inch taller ball joint stud increases negative camber to maintain a greater tire contact patch for better grip while cornering
- Lower arms include adjustable steering stops and bump stops
- Utilizes stock style sway bar links (not included)
- Mounts in the stock location requiring no modifications
- Compatible with stock spindles or drop spindles
- Double-sheer lower mounts are coil-over ready and are compatible with QA1 single adjustable, double adjustable, and MOD Series Pro coil-over shocks
- Compatible with factory or aftermarket disc brake systems
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.