Ridetech RidePro-HP E5 Ride Height Sensor Upgrade Kit
029-30400036
RidePro-HP Upgrade Kits
Upgrades an existing pressure-based RidePro E5 air suspension management system by measuring both air pressure and ride height for complete precision and control. RidePro-HP E5 Ride Height Sensor Upgrade Kit will establish ride height and spring balance loads by comparing spring air pressure with ride height position, eliminating any cross loading while keeping the vehicle level. This is great for dynamic driving situations that entail quick transitions often seen in high-performance driving that may see hard stops, fast acceleration, and sudden steering changes.
Note: RidePro-HP sensors are ONLY compatible with a RidePro E5 Digital Control System.
Features
- Combines with the RidePro E5 pressure measurements for precision accuracy in ride height and air pressure
- Durable heavy-duty ride height sensors
- Linkage rods are bendable with rubber rod ends
- Use of weatherproof connectors and wiring harness for OEM reliability
Kit Contents
- (4) Ride Height Sensors
- (4) Ride Height Sensor Linkages
- Group Wiring Harness
- Installation Hardware -Consisting of 1/4 in. sensor bolts, Nyloc nuts, flat washers, mounting tabs, and heat shrink tubes
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.