Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Product Discontinued
Currently Unavailable
This product is no longer available. Please call customer service for assistance at 1-800-345-4545.
- Interior Rear View Mirror Glue Kit
Part TypeAdhesive
BrandACDELCO
Package Height0.4
Package Width3.8
Package Length6.5
Weight0.02 PG
Part CategoryReplacement Parts
Programming RequiredNo
Resistant ToWater
Signs Of Wear & Troubleshooting - Section 1 - Bullet 1This product should never be used on bare metals.
Protect From FreezingYes
Curing Time5
Good Maintenance Practices - Section 1 - Bullet 1Today's adhesives provide a number of engineering advantages over traditional fasteners. Oftentimes they form a bond that is actually stronger than the parts being attached together. Adhesives are also one of the only ways to bond new materials like carbon composites that can't be welded. They effectively distribute loads better than spot welds or rivets, and allow panels to be attached across wide surface areas, as adhesives distribute outside forces more efficiently.
Faq - Answer 3Yes, large plastic body panels can be effectively bonded when the product is correctly applied.
Faq - Answer 2Yes. Applied heat may cause the adhesive to cure incorrectly if the bonded parts are already hot. Applied heat can be helpful if the bonded parts are cool. Do not apply heat if the bonded parts are already hot, adhesive may not cure correctly.
Shelf Life After Opening1
FormatSingle
Faq - Answer 1Yes. Before applying the product, surfaces should be clean and dry. For best results, read product instructions for application information.
Work Time1
Features & Benefits - Bullet 2Provides faster cure time for smaller body panels
Features & Benefits - Bullet 3Adhesive curing can be accelerated by heat
Product DescriptionACDelco Structural Urethane Installation Adhesive is a high-strength structural adhesive that is used for bonding a variety of plastics to other plastics (e.g. SMC, fiberglass, and carbon fiber) and plastics to primed, painted, or e-coated metals. This urethane adhesive is engineered with a non-sag urethane formula. Requires the use of a dispensing tool that is not included. ⚠<b> WARNING:</b> Cancer - www.P65Warnings.ca.gov
Maximum Temperature Rating28
Features &#38; Benefits - Bullet 1Effective for general purpose bonding of trim components and small body panels, including spoilers, ground effects, headlight buckets
Shelf Life After Opening (D)1
ColorBlue-Green
FlammableYes
Signs Of Wear &#38; Troubleshooting - Section 1 - Bullet 2If repositioning is necessary, slide the part to reposition. Pulling the part away and reapplying will result in poor adhesion.
Container TypePlastic Container
Part FitmentUniversal
Package Includes1 - Cleaner/Activator Towelette and 1 - Pouch of Glue
Faq - Question 3Will this product work effectively on large plastic body panels?
Grade TypeOE
Faq - Question 2Are there any drawbacks to accelerating the bonding process with heat?
Faq - Question 1Do the surfaces to be bonded need preparation before using these products?
Vendor Part Number10-1010
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations
