Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Vehicle Info Needed
Lowest Price GuaranteePart TypeBrake Fluid
BrandACDELCO
Package Height2.7
Package Width2.7
Package Length7.4
Weight1.2 PG
Part CategoryReplacement Parts
Product TypeBrake Fluid
Programming RequiredNo
Polyglycol Ether BasedYes
Signs Of Wear & Troubleshooting - Section 1 - Bullet 1If your brake pedal feels mushy or goes all the way to the floor under heavy or repeated use, it could be a sign that your brake fluid is old and needs to be changed.
Faq - Answer 8No, while the fluid level can go down due to leaks, most often the fluid level will go down as the brake pads and rotors/drums wear and the calipers must push farther to make the system work.
Faq - Answer 7No, DOT 5 cannot be mixed with DOT 3 or DOT 4 brake fluid.
Faq - Answer 6Yes, the color of the new brake fluid is not critical as long as the brake fluid specification matches what is recommended for your vehicle. Only the brake fluid specification is critical.
Faq - Answer 5Yes, DOT 4 has a higher boiling point than DOT 3 and can be used instead of DOT 3.
Faq - Answer 4No, adding fluid is a normal practice as the brakes wear. However, when changing the brake fluid the system must always be flushed first, this is the only way the system can be cleaned of contaminants. After refilling with clean fluid the system must be properly bled, otherwise the fluid level will be too low and the system may not work as needed.
Good Maintenance Practices - Section 1 - Bullet 1It is important to completely flush or bleed your brake fluid and replace with new fluid when the fluid has become dark or contaminated to ensure the highest levels of performance. Extreme applications like driving down mountain roads, driving or towing with heavy loads, and racing increase the rate at which your brake fluid deteriorates and will create the need for it to be changed more often.
Faq - Answer 3No, DOT 3 can be added to a DOT 4 system but only if it is absolutely necessary, for example the fluid level is critically low. After getting to a safe area it will be necessary to flush out the system and add the correct amount of new DOT 4 fluid.
Faq - Answer 2Yes, add new fluid whenever the fluid reservoir shows fluid is needed. Additionally, change your brake fluid if the reservoir fluid is dark, murky or has significant contamination.
Faq - Answer 1No, ACDelco recommends that only trained professionals change brake fluid. Correctly flushing, filling and bleeding the system is critical to braking performance.
Damaging To Painted SurfacesYes
Good Maintenance Practices - Section 1 - Bullet 2Always follow vehicle manufacturer's recommendations when adding brake fluid.
Proper Disposal VerbiageAll laws and regulations should be observed when disposing of this product.
Good Maintenance Practices - Section 1 - Bullet 3Do not remove master cylinder cover until area is clean of foreign matter.
Features & Benefits - Bullet 2High boiling point to minimize brake fluid boiling and vapor lock
Meets Or Exceeds Original Equipment Manufacture SpecificationsYes
Features & Benefits - Bullet 3Excellent low temperature capability and stability when used where lower cold viscosities are required
Product DescriptionACDelco Clutch and Brake Fluid, DOT 4 GMW is a premium brake and hydraulic clutch fluid for systems requiring a FMVSS No. 116 DOT 4, ISO 4925 Class 6. ACDelco Clutch and Brake Fluid, DOT 4 GMW is suitable for all applications requiring a DOT 4 performance level brake fluid and meets GMW 3356. The ACDelco Clutch and Brake Fluid, DOT 4 GMW protects internal components from corrosion under normal use and service. ⚠<b> WARNING:</b> Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Features &#38; Benefits - Bullet 1Premium brake and hydraulic clutch fluid that protects internal components from corrosion under normal use
Shelf Life After Opening (D)12
Minimum Dry Boiling Point491
Width (In)2.75
Faq - Question 8Is a leak the only possible cause of reduced fluid levels in my brake system?
Faq - Question 7Can I use DOT 5 brake fluid with DOT 3 or DOT 4?
Height (In)7.25
Faq - Question 6Can I mix colors of brake fluid within my brake system?
Faq - Question 5Can I use ACDelco Clutch and Brake Fluid, DOT 4 GMW in my vehicle that requires DOT 3?
Signs Of Wear &#38; Troubleshooting - Section 1 - Bullet 2Poor or old brake fluid could result in brake failure or delayed brake response. This is prevented by changing your brake fluid when necessary, and using the vehicle manufacturer recommended brake fluid for your vehicle.
Minimum Wet Boiling Point297
Length (In)2.75
Shelf Life After Opening1
Flash Point275
Container TypePlastic Container
Part FitmentUniversal
Faq - Question 4Should I flush or bleed my current brake fluid before adding more?
Faq - Question 3Can I use DOT 3 brake fluid interchangeably with DOT 4 if my vehicle's manufacturer recommends a DOT 4 brake fluid but says DOT 3 can be added if necessary?
Weight (Lb)1.21
Grade TypeOE
Faq - Question 2Should I periodically change or add more brake fluid to my brake system?
Faq - Question 1Can I change my own brake fluid?
Vendor Part Number10-4110
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations
