Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Vehicle Info NeededACDELCOPART NUMBER: 065-14D802MH
PAD SETRR DISC BRK (92)
$4699
Ships on 09/10/2026
Lowest Price GuaranteeBrandACDELCO
Package Height6.4
Package Width9.5
Package Length12.5
Weight24.0 PG
Weight4.8
Outer Pad Overall Thickness0.645
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Pad Wear Sensor IncludedNo
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Fmsi NumberD802-7673
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Friction Material AttachmentBonded
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Chamfered EdgesYes
Signs Of Wear & Troubleshooting - Section 1 - Bullet 1Chirping, grinding, or squeaking noises when braking
Signs Of Wear & Troubleshooting - Section 1 - HeaderBrake pad signs of wear include:
Inner Pad Width6.816
Outer Pad Height2.140
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Faq - Answer 3No, but it is a good idea to inspect your brake pads at each tire rotation.
Faq - Answer 2Yes, ACDelco also offers various grades of brake pads.
Faq - Answer 1No, but it is a good idea to inspect them for wear-out, cracking, leaking etc.
Abutment Clips IncludedYes
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Features & Benefits - Bullet 6For General Motors vehicles as well as most makes and models
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (Consult a certified technician as necessary).
Features & Benefits - Bullet 2Noise and vibration reducing chamfers and slots in the friction material match GM original equipment
Features & Benefits - Bullet 3Backing plates design resists corrosion and increases friction material bonding strengh
Features & Benefits - Bullet 4Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage
Features & Benefits - Bullet 5Economical value with dependable quality
Product DescriptionACDelco Silver (Advantage) Disc Brake Pad Sets are a quality, high value alternative for General Motors vehicles as well as most makes and models and are backed by General Motors. These brake pads are formulated using traditional friction material integrated with iron or steel fibers, increasing durability. Semi-Metallic brake pads readily handle higher temepratures and dissipate heat from the brake rotor surface, reducing brake fade. Noise and vibration concerns are reduced by chamfering and/or slotting in the fiction material, along with use of specialized backing plate shims. Noise-dampening hardware kits are included when applicable. A high quality replacement for vehicles on the road today, ACDelco Silver (Advantage) Semi-Metallic Disc Brake Pads are ready to be installed right out of the box. They are independently tested using SAE J2784 standards.ACDelco Silver (Advantage) parts are a good choice for many vehicles on the road today. Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage. ⚠<b> WARNING:</b> Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Features &#38; Benefits - Bullet 1Backing plate clips and shims (where applicable) feature a specialized coating for quieter operation
Universal Or Specific FitSpecific
Friction Material CompositionMetallic
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems:
Width (In)6.3
Mounting Hardware IncludedYes
Height (In)2.5
Signs Of Wear &#38; Troubleshooting - Section 1 - Bullet 2Difficulty stopping the vehicle
Signs Of Wear &#38; Troubleshooting - Section 1 - Bullet 3A low or sinking brake pedal
Inner Pad Height2.140
SlottedNo
Signs Of Wear &#38; Troubleshooting - Section 1 - Bullet 4Brake pedal pulsation (not to be confused with normal ABS operation)
Length (In)9.5
Signs Of Wear &#38; Troubleshooting - Section 1 - Bullet 5Vehicle pulls to the left or right when brakes are applied
Outer Pad Width6.816
Inner Pad Overall Thickness0.645
Backing MaterialSteel
Faq - Question 3Do I have to replace my brake pads after a certain amount of time?
Faq - Question 2Does ACDelco offer other grades of brake pads?
Faq - Question 1Do I have to replace all my brake parts when replacing my brake pads?
Vendor Part Number14D802MH
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations
