
Product Discontinued
Currently Unavailable
This product is no longer available. Please call customer service for assistance at 1-800-345-4545.
- Front Inner Wheel Bearing Seal
Part TypeWheel Bearing Seal
BrandACDELCO
Package Height0.7
Package Width0.58
Package Length4.5
Weight0.43 PG
Part CategoryReplacement Parts
Programming RequiredNo
PositionFront Inner
Seal TypeGasket
Signs Of Wear & Troubleshooting - Section 1 - Bullet 1Grease is leaking from the bearings
Signs Of Wear & Troubleshooting - Section 1 - HeaderSigns of wear for wheel seals include but are not limited to:
Good Maintenance Practices - Section 1 - Bullet 1Replace seals, for applicable designs, when doing a bearing replacement
Housing Bore (Mm)100.0
Good Maintenance Practices - Section 1 - Bullet 4If the vehicle has an ABS, traction control or stability control light, try cleaning the magnetic encoder on the bearing before replacing the bearing assembly
Outside Diameter (Mm)100.2
Flange MaterialSteel
Inside Diameter2.34
Good Maintenance Practices - Section 1 - Bullet 2Use recommended tool to remove and install the seals or damage and leaking may occur
Shaft Diameter (Mm)59.92
Good Maintenance Practices - Section 1 - Bullet 3Use recommended grease or differential fluid to keep the bearing properly lubricated
Inside Diameter (Mm)59.4
Features & Benefits - Bullet 2GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
Features & Benefits - Bullet 3GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Features & Benefits - Bullet 4GM regularly updates production and service part designs to integrate new materials and technologies
Product DescriptionGM Genuine Parts Wheel Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE). ⚠<b> WARNING:</b> Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Sealing Surface MaterialRubber
Features &#38; Benefits - Bullet 1Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
Shaft Diameter2.35
MaterialRubber,Steel
Height (In)0.7
Signs Of Wear &#38; Troubleshooting - Section 1 - Bullet 2Visible damage to the wheel seal
Signs Of Wear &#38; Troubleshooting - Section 1 - Bullet 3Noises coming from the tires and wheels or bearings
Length (In)4.5
Part FitmentDirect Fit
Rim ShapeRound
Outside Diameter3.94
Weight (Lb)0.43
Housing Bore99.06
Grade TypeOE
Vendor Part Number290-275
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations