Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Product Discontinued
Currently Unavailable
This product is no longer available. Please call customer service for assistance at 1-800-345-4545.
- REMAN STARTER FORD PMGR 1
Part TypeStarter Motor
BrandACDELCO
Package Height4.6
Package Width7.1
Package Length11.3
Signs Of Wear & Troubleshooting - Section 2 - Bullet 9Damage to flywheel
Power Rating1.4
Signs Of Wear & Troubleshooting - Section 2 - Bullet 7Loose mounting bolts
Signs Of Wear & Troubleshooting - Section 2 - Bullet 8Sticking starter drive
Signs Of Wear & Troubleshooting - Section 2 - Bullet 5Other vehicle parts that might cause related starter problems include:
Signs Of Wear & Troubleshooting - Section 2 - Bullet 6Electrical fault
DesignPermanent Magnet Gear Reduction
Power Rating (Hp)1.877
Mounting Shims IncludedNo
Product DescriptionACDelco Gold (Professional) Remanufactured Starters are the high quality alternative to Original Equipment (OE) parts. These starters have new bronze sintered and oil-impregnated bushings. Solenoid contacts are new with copper terminals and plated hardware. Remanufacturing starters is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear w ith new components. Damaged and obsolete parts are replaced and are end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing returns components back into service rather than processing as scrap or simply disposing of them. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional. ⚠<b> WARNING:</b> Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Mounting Bolt Hole Quantity3
Nose Cone MaterialAluminum
Starter RotationClockwise (Right)
Width (In)7.1
Mounting TypeFlange
Mounting Flange To Pinion End At Rest15.0
Length (In)11.3
Part CategoryReplacement Parts
Programming RequiredNo
Tooth Quantity12
Solenoid AttachedYes
Country Of Origin 12CA
Country Of Origin 13KR
Country Of Origin 14CN
Country Of Origin 15DK
Case GroundingGrounded Case
Country Of Origin 10MY
Voltage12.0
Country Of Origin 11IN
Features &#38; Benefits - Bullet 2Starters have new bronze sintered and oil-impregnated armature bushings
Meets Or Exceeds Original Equipment Manufacture SpecificationsYes
Features &#38; Benefits - Bullet 3Solenoid contacts are new with copper terminals and plated hardware
Country Of Origin 6IL
Features &#38; Benefits - Bullet 4Performance-tested and inspected to ensure they meet your expectations for quality design and component specifications
Country Of Origin 9US
Country Of Origin 7MX
Features &#38; Benefits - Bullet 1Remanufactured using consistent quality processes; not just rebuilt
Country Of Origin 8TW
Re-Clockable FlangeNo
Good Maintenance Practices - Section 1 - Bullet 8Keeping all connections clean and tight will make sure your starter will crank with full power.
Mounting Hardware IncludedNo
Good Maintenance Practices - Section 1 - Bullet 9It is very important to try and keep the starter area clean from leaking car fluids or any other debris that may be near it.
Good Maintenance Practices - Section 1 - Bullet 6Check electrical connections, making sure they are kept clean.
Good Maintenance Practices - Section 1 - Bullet 7Make sure all connections to the battery are firmly attached and in good condition.
Country Of Origin 16DE
Country Of Origin 17CH
Signs Of Wear &#38; Troubleshooting - Section 1 - Bullet 6Engine will not crank
Signs Of Wear &#38; Troubleshooting - Section 1 - Bullet 7Engine cranks slowly
TypePermanent Magnet Gear Reduction
Signs Of Wear &#38; Troubleshooting - Section 1 - Bullet 8Clunking/grinding noise when starting engine
Height (In)4.6
Signs Of Wear &#38; Troubleshooting - Section 1 - Bullet 9Starter will not engage
Faq - Question 5Yes. These starters are designed to withstand a wide range of weather conditions.
Signs Of Wear &#38; Troubleshooting - Section 1 - Bullet 5Indicators that there could be a problem with your vehicle's starter are:
FamilyFord
Nose Cone TypeOpen Nose
Faq - Question 4Yes. It is included where the design of the starter requires a solenoid.
Weight (Lb)8.29
Vendor Part Number336-1937A
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations
