REMAN STARTER BOSCH PMGR
Product Discontinued
ACDELCOPART NUMBER: 065-336-1995

REMAN STARTER BOSCH PMGR

Currently Unavailable

This product is no longer available. Please call customer service for assistance at 1-800-345-4545.

    REMAN STARTER BOSCH PMGR
Part TypeStarter Motor
BrandACDELCO
Package Height4.6
Package Width7.1
Package Length11.3
Signs Of Wear & Troubleshooting - Section 2 - Bullet 9Damage to flywheel
Power Rating2.0
Signs Of Wear & Troubleshooting - Section 2 - Bullet 7Loose mounting bolts
Signs Of Wear & Troubleshooting - Section 2 - Bullet 8Sticking starter drive
Signs Of Wear & Troubleshooting - Section 2 - Bullet 5Other vehicle parts that might cause related starter problems include:
Signs Of Wear & Troubleshooting - Section 2 - Bullet 6Electrical fault
DesignPermanent Magnet Gear Reduction
Power Rating (Hp)2.682
Mounting Shims IncludedNo
Product DescriptionACDelco Gold (Professional) Remanufactured Starters are the high quality alternative to Original Equipment (OE) parts. These starters have new bronze sintered and oil-impregnated bushings. Solenoid contacts are new with copper terminals and plated hardware. Remanufacturing starters is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear with new components. Damaged and obsolete parts are replaced and are end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing returns components back into service rather than processing as scrap or simply disposing of them. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional. &#9888;<b> WARNING:</b> Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Mounting Bolt Hole Quantity2
Nose Cone MaterialAluminum
Starter RotationClockwise (Right)
Mounting TypeFlange
Mounting Flange To Pinion End At Rest21.0
Part CategoryReplacement Parts
Programming RequiredNo
Tooth Quantity9
Solenoid AttachedYes
Country Of Origin 12MX
Country Of Origin 13PL
Country Of Origin 14DK
Country Of Origin 15KR
Case GroundingGrounded Case
Country Of Origin 10MY
Voltage12.0
Country Of Origin 11IN
Features &#38;#38; Benefits - Bullet 2Starters have new bronze sintered and oil-impregnated armature bushings
Meets Or Exceeds Original Equipment Manufacture SpecificationsYes
Features &#38;#38; Benefits - Bullet 3Solenoid contacts are new with copper terminals and plated hardware
Country Of Origin 6FR
Features &#38;#38; Benefits - Bullet 4Performance-tested and inspected to ensure they meet your expectations for quality design and component specifications
Country Of Origin 9TW
Country Of Origin 7CA
Features &#38;#38; Benefits - Bullet 1Remanufactured using consistent quality processes; not just rebuilt
Country Of Origin 8CN
Re-Clockable FlangeNo
Good Maintenance Practices - Section 1 - Bullet 8Keeping all connections clean and tight will make sure your starter will crank with full power.
Mounting Hardware IncludedNo
Good Maintenance Practices - Section 1 - Bullet 9It is very important to try and keep the starter area clean from leaking car fluids or any other debris that may be near it.
Good Maintenance Practices - Section 1 - Bullet 6Check electrical connections, making sure they are kept clean.
Good Maintenance Practices - Section 1 - Bullet 7Make sure all connections to the battery are firmly attached and in good condition.
Country Of Origin 16DE
Signs Of Wear &#38;#38; Troubleshooting - Section 1 - Bullet 6Engine will not crank
Signs Of Wear &#38;#38; Troubleshooting - Section 1 - Bullet 7Engine cranks slowly
TypePermanent Magnet Gear Reduction
Signs Of Wear &#38;#38; Troubleshooting - Section 1 - Bullet 8Clunking/grinding noise when starting engine
Signs Of Wear &#38;#38; Troubleshooting - Section 1 - Bullet 9Starter will not engage
Faq - Question 5Yes. These starters are designed to withstand a wide range of weather conditions.
Signs Of Wear &#38;#38; Troubleshooting - Section 1 - Bullet 5Indicators that there could be a problem with your vehicle's starter are:
FamilyBosch
Nose Cone TypeOpen Nose
Faq - Question 4Yes. It is included where the design of the starter requires a solenoid.
Vendor Part Number336-1995
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations
p65 warning
Your Cart

Your shopping cart is empty!