
Part TypeStarter
BrandACDELCO
Power Rating1.0
Programming RequiredNo
Signs Of Wear & Troubleshooting - Section 2 - Bullet 3Sticking starter drive
Tooth Quantity10
Signs Of Wear & Troubleshooting - Section 2 - Bullet 4Damage to flywheel
Solenoid AttachedYes
Signs Of Wear & Troubleshooting - Section 1 - Bullet 1Engine will not crank
Signs Of Wear & Troubleshooting - Section 1 - HeaderIndicators that there could be a problem with your vehicle’s starter are:
Good Maintenance Practices - Section 1 - Bullet 1Check electrical connections, making sure they are kept clean.
Faq - Answer 3No. However a shim may be required at the starter's mounting surface to align the starter, so the starter drive makes appropriate contact with the flywheel.
Faq - Answer 2Yes. These starters are designed to withstand a wide range of weather conditions.
Faq - Answer 1Yes. It is included where the design of the starter requires a solenoid.
Good Maintenance Practices - Section 1 - Bullet 4It is very important to try and keep the starter area clean from leaking car fluids or any other debris that may be near it.
Features & Benefits - Bullet 6Computer tested for solenoid contact life, coil balance, and pull strength, and the drive gears/clutches are assembled under tight specifications for even greater peace of mind
Features & Benefits - Bullet 7Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Good Maintenance Practices - Section 1 - Bullet 2Make sure all connections to the battery are firmly attached and in good condition.
Features & Benefits - Bullet 8Premium aftermarket replacement part
Voltage12
Good Maintenance Practices - Section 1 - Bullet 3Keeping all connections clean and tight will make sure your starter will crank with full power.
Features & Benefits - Bullet 9Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
Features & Benefits - Bullet 2All components are 100% NEW to provide improved performance
Meets Or Exceeds Original Equipment Manufacture SpecificationsYes
Features & Benefits - Bullet 3Engineering enhancements to internal components provide the latest, most efficient unit for your vehicle
Power Rating (Hp)1.4
Features & Benefits - Bullet 4Key components are greased to ensure long term reliability in harsh conditions
Features & Benefits - Bullet 5All dimensions, key mounting surfaces, and contact points are gauged and measured to ensure proper fit
Mounting Shims IncludedNo
Product DescriptionACDelco Gold (Professional) NEW Starters are the high quality alternative to Original Equipment (OE) parts. Key components are lubricated to help ensure improved performance and long life reliability even in the toughest conditions. Starters have solenoids that are computer tested for contact life, coil balance, and pull strength, drive gears/clutches assembled under tight specifications for even greater peace of mind. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional. ⚠<b> WARNING:</b> Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Mounting Bolt Hole Quantity2
Features &#38; Benefits - Bullet 1NEW units are manufactured under the guidelines of ISO Quality Standards to ensure consistent quality
Nose Cone MaterialAluminum
Signs Of Wear &#38; Troubleshooting - Section 2 - HeaderOther vehicle parts that might cause related starter problems include:
Re-Clockable FlangeNo
Starter RotationClockwise
Width (In)7.2
Mounting TypeFlange
Height (In)5.8
Signs Of Wear &#38; Troubleshooting - Section 1 - Bullet 2Engine cranks slowly
Signs Of Wear &#38; Troubleshooting - Section 1 - Bullet 3Clunking/grinding noise when starting engine
Signs Of Wear &#38; Troubleshooting - Section 1 - Bullet 4Starter will not engage
Length (In)12.7
Signs Of Wear &#38; Troubleshooting - Section 2 - Bullet 1Electrical fault
Signs Of Wear &#38; Troubleshooting - Section 2 - Bullet 2Loose mounting bolts
FamilyWound Field Offset Gear Reduction
Nose Cone TypeOpen Nose
Faq - Question 3Do I always need a starter shim?
Weight (Lb)8.16
Faq - Question 2Can I be assured that the unit will last, especially in extreme weather?
Faq - Question 1Is the solenoid included?
Vendor Part Number337-1160
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations