Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Product Discontinued
Currently Unavailable
This product is no longer available. Please call customer service for assistance at 1-800-345-4545.
- Rack and Pinion Boot Kit with Boot and Zip Ties
Part TypeRack and Pinion Bellow
BrandACDELCO
Package Height3.0
Package Width4.0
Package Length6.125
Weight0.3 PG
Part CategoryReplacement Parts
Signs Of Wear & Troubleshooting - Section 1 - Bullet 1Visible component wear: cracks, cuts, or gouges in your vehicle's bellows are all signs that you should consider replacing your vehicle's rack and pinion bellows
Bellows MaterialNitrile Rubber
Rib Quantity13
ColorBlack
Signs Of Wear & Troubleshooting - Section 1 - HeaderSigns of wear for rack and pinion bellows kits include but are not limited to:
Good Maintenance Practices - Section 1 - Bullet 1Exposure to harsh conditions such as uneven terrain, severe weather, or large temperature changes can all take their toll on the integrity of your rack and pinion bellows, causing wear and even failure. As your bellows wear, your vehicle's steering system is exposed to water and other contaminants from the road, leading to water and dirt accumulation and degradation of the system.
Faq - Answer 3No. The boot does not need to be removed, but the clamp securing the bellows to the inner tie rod shaft will need to be loosened to prevent the bellows boot from twisting when the tie rod shaft is turned to adjust the vehicle toe in or toe out specs.
MaterialNitrile Blend Rubber
Bellows Rib Quantity13
Steering SystemVarious - Application Specific
Faq - Answer 2No. The CV boot is housed on the axle and helps prevent grease from leaking out of the CV Joint. The bellows boot is housed on the steering rack and helps prevent dirt from getting into the steering rack and pinion system.
Glue IncludedNo
Clamps IncludedYes
Faq - Answer 1Yes. Always consult the Vehicle Owner's Manual or an expert technician before making any repairs or adjustments.
Good Maintenance Practices - Section 1 - Bullet 4Regularly inspect rack and pinion bellows kit for signs of damage or wear and replace them if signs of damage are found.
Number Of DoorsVarious Application Specific
Good Maintenance Practices - Section 1 - Bullet 2Inspect your rack and pinion bellows to help detect wear before it becomes a major problem.
Grease IncludedNo
Good Maintenance Practices - Section 1 - Bullet 3Installing new steering rack bellows can interfere with the alignment of your vehicle. Perform a full four-wheel vehicle alignment after any rack and pinion bellows replacement.
Bellows End 1 Inside Diameter44
Meets Or Exceeds Original Equipment ManuYes
Features & Benefits - Bullet 2Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Features & Benefits - Bullet 3Premium aftermarket replacement part
Features & Benefits - Bullet 4Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
Bellows Extended Length174.5
Product DescriptionACDelco Gold (Professional) Rack and Pinion Bellows Kits are a high quality alternative to Original Equipment (OE) parts. These bellow kits are installed on each side of your vehicle's rack and pinion steering system, helping protect the rack from exposure to water, debris, and other potentially damaging contaminants. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-qual ity parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional. ⚠<b> WARNING:</b> Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Features &#38; Benefits - Bullet 1Installed on each side of your vehicle's rack and pinion steering gear
Universal Or Specific FitSpecific
Good Maintenance Practices - Section 1 - HeaderBefore purchasing and installing a rack and pinion bellows kit, make sure it is the correct fit for your vehicle.
Mounting Hardware IncludedYes
Bellows ColorBlack
Bellows End 2 Inside Diameter11
Faq - Question 3Does the bellows boot need to be removed to turn the inner tie rod during an alignment procedure?
Grade TypePremium
Faq - Question 2Are a CV boot and Rack and Pinion Bellows the same part?
Faq - Question 1Should the Vehicle Owner's Manual or an expert technician be consulted before making any repairs or adjustments?
Vendor Part Number45A7038
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations
