Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Vehicle Info Needed
Lowest Price GuaranteeBrandACDELCO
Package Height2.5
Package Width6.7
Package Length10.2
Weight3.08 PG
Outer Pad Overall Thickness17.6
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Inner Pad Friction Material Thickness11
Pad Wear Sensor IncludedNo
Inner Pad Friction Material Thickness (In)0.43in
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Friction Material AttachmentBonded
Chamfered EdgesNo
Signs Of Wear & Troubleshooting - Section 1 - Bullet 1Vehicle pulls to the left or right when brakes are applied.
Pad Shims IncludedYes
Signs Of Wear & Troubleshooting - Section 1 - HeaderBrake pedal pulsation (not to be confused with normal ABS operation).
Inner Pad Width3.52
Outer Pad Height1.8
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Abutment Clips IncludedYes
Pad Quantity4
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Features & Benefits - Bullet 6Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
Features & Benefits - Bullet 7GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Features & Benefits - Bullet 8GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Features & Benefits - Bullet 9GM regularly updates production and service part designs to integrate new materials and technologies
Features & Benefits - Bullet 2Premium shims, slots, and chamfers help to diminish noise, vibration, and braking harshness
Features & Benefits - Bullet 3OE brake components are specifically designed to work with GM vehicle safety systems, such as electronic traction control and anti-lock brakes
Features & Benefits - Bullet 4Pad backing plates are painted for corrosion protection
Features & Benefits - Bullet 5On select new vehicles zinc-nickel plating is used for anti-corrosion under the painted coat to help prevent binding of the pad to the caliper
Product DescriptionGM Genuine Parts Disc Brake Pad Sets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts OE Brake Pads are the true OE parts installed during production or validated by General Motors for GM vehicles. GM engineers spent many years developing, testing, and validating brake pad solutions for each brake corner for every GM vehicle. GM Genuine OE pads are designed, engineered, tested to rigorous standards and backed by General Motors.GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE). ⚠<b> WARNING:</b> Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Features &#38; Benefits - Bullet 1Integrally molded - friction material molded to backing plate for bond integrity
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems.
Outer Pad Friction Material Thickness0.43
Mounting Hardware IncludedYes
Good Maintenance Practices - Section 1 - Bullet 9The following should be conducted by a qualified technician:
Prepared For Pad Wear SensorYes
Adhesive Backed Pad ShimNo
Inner Pad Height45.35
SlottedNo
Pad Shim MaterialSteel
Outer Pad Width3.52
Inner Pad Overall Thickness0.69
Backing MaterialSteel
Friction Surface ScorchedNo
Grade TypeOE
Brake Lubricant IncludedNo
Vendor Part Number86793555
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations
