
HD/Race Sprung 6-Pad Transmission Clutch Kit Fits Select Ford/Lincoln/Mercury/Mazda
- See Below for Fitment and Details
ACT Clutch FF5-HDG6 Features:
FF5-HDG6 kit features ACT's most popular Heavy-Duty pressure plate. ACT Heavy-Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled Performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 6-pad, spring-centered race disc features a spring-center to properly damp torsional vibrations and resist failure under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 6-pad, spring-centered race disc, engagement is harsher, but shifting is faster. The 6-pad, spring-centered disc is recommended for larger clutch sizes to absorb more heat.
- Includes Clutch Release Bearing (RB009), Clutch Pressure Plate (F024), Clutch Flywheel (601020), Clutch Friction Disc (6240508-1), Clutch Alignment Tool (AT130)
- Light To Moderate Pedal Effort
- Aggressive Engagement
- Oe To Mild Gear Rattle; Moderate Friction Life
- Extended by ACT's Exclusive Diaphragm Design; Carefully Engineered
- Precisely Assembled
- Accurately Balanced
- Uses Select Ceramic Friction Materials For High Heat Tolerance And Maximum Performance; Recommended For High Horsepower Street Or Race Use; 100-percent Clamp Load Tested And Dynamically Computer Balanced For Smooth High Rpm Reliability
- Flywheel Type: Streetlite
- Weight: 30.1 lbs.
- Torque Capacity: 640 ft.-lbs.
- Torque Capacity Over OE: 73-percent
- Flywheel Included: Yes
- Pressure Plate Type: Heavy-Duty
- Release Bearing: Yes
- Clutch Disc Diameter: 9.4 in.
- Clutch Disc Diameter: 240 mm
- Disc Material: Ceramic
- Input Spline Quantity: 23
- Input Shaft Diameter: 1 in.
- Alignment Tool Included: Yes
ACT Clutch FF5-HDG6 Notes:
- Must be used with the ACT flywheel (included in kit). Gear Rattle is expected when using the ACT single mass flywheel.

![Pilot Bearing Puller Attachment [Slide Hammer Required]](https://www.jegs.com/images/mini_200/600/693/693-27059.jpg)


![Transmission Teardown Work Station [1/2-Ton Capacity]](https://www.jegs.com/images/mini_200/500/555/555-81432.jpg)
![Rolling Work Table [200 lb. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-81420.jpg)
![2-Ton Low-Profile Aluminum Floor Jack [4,000 lbs. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-80006.jpg)



![Penetrating Oil [11 oz. Aerosol Can]](https://www.jegs.com/images/mini_200/600/639/639-11043.jpg)


![Fender Cover with Pocket [23 in. W x 31 1/2 in. L]](https://www.jegs.com/images/mini_200/500/555/555-65010.jpg)



