
XT/Race Sprung 4-Pad Transmission Clutch Kit Fits Select Multiple Makes/Models
- See Below for Fitment and Details
ACT Clutch SB7-XTG4 Features:
SB7-XTG4 kit features an Xtreme pressure plate for the most demanding driver. ACT Xtreme pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled Performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 4-pad spring-centered race disc features a spring-center construction to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 4-pad spring-centered race disc, engagement is harsher, but shifting is faster. ACT's 4-pad spring-centered race disc is well-suited for smaller disc sizes in smaller engines.
- Includes Clutch Alignment Tool (AT90), Clutch Pilot Bearing (PB1004), Clutch Flywheel (600705), Clutch Release Bearing (RB004), Clutch Friction Disc (4224218-1), Clutch Pressure Plate (SB017X)
- Moderate To Heavy Pedal Effort
- Aggressive Engagement
- Oe To Mild Gear Rattle; Moderate Friction Life
- Extended by ACT's Exclusive Diaphragm Design; Carefully Engineered
- Precisely Assembled
- Accurately Balanced
- Uses Select Ceramic Friction Materials For High Heat Tolerance And Maximum Performance; Recommended For High Horsepower Street Or Race Use; 100-percent Clamp Load Tested And Dynamically Computer Balanced For Smooth High Rpm Reliability
- Flywheel Type: Streetlite
- Weight: 26.1 lbs.
- Torque Capacity: 449 ft.-lbs.
- Torque Capacity Over OE: 166-percent
- Flywheel Included: Yes
- Pressure Plate Type: Xtreme
- Release Bearing: Yes
- Clutch Disc Diameter: 8.8 in.
- Clutch Disc Diameter: 224 mm
- Disc Material: Ceramic
- Input Spline Quantity: 24
- Input Shaft Diameter: 1 in.
- Alignment Tool Included: Yes
ACT Clutch SB7-XTG4 Notes:
- Conversion kit. Includes ACT Streetlite flywheel. Must use ACT flywheel (included in kit).

![Pilot Bearing Puller Attachment [Slide Hammer Required]](https://www.jegs.com/images/mini_200/600/693/693-27059.jpg)


![Transmission Teardown Work Station [1/2-Ton Capacity]](https://www.jegs.com/images/mini_200/500/555/555-81432.jpg)
![Rolling Work Table [200 lb. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-81420.jpg)
![2-Ton Low-Profile Aluminum Floor Jack [4,000 lbs. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-80006.jpg)



![Penetrating Oil [11 oz. Aerosol Can]](https://www.jegs.com/images/mini_200/600/639/639-11043.jpg)


![Fender Cover with Pocket [23 in. W x 31 1/2 in. L]](https://www.jegs.com/images/mini_200/500/555/555-65010.jpg)



