
![Trailer D Ring [4-1/2 in. x 4-7/8 in., 1-3/8 in. ID, 1660 lb Working Load Limit, Zinc Oxide, Steel]](https://www.jegs.com/images/mini_750/0/049/049-all10210.jpg)
Trailer D Ring [4-1/2 in. x 4-7/8 in., 1-3/8 in. ID, 1660 lb Working Load Limit, Zinc Oxide, Steel]
Bolt-in style, steel D-Ring helps create a mounting point in a trailer floor, truck bed or anywhere an attach point is needed. A round steel ring with a 1-3/8 Inch inside diameter easily flips up for attaching a ratchet strap or other tie down and lays flat when not in use. Each D-Ring has a 1660 lb working load limit which is the maximum load a D-Ring should be subjected to during normal use.
Allstar Performance ALL10210 Trailer D Ring Features:
- 4-1/2 in. x 4-7/8 in..
- 1-3/8 in. ID.
- 1660 lb Working Load Limit.
- Zinc Oxide.
- Steel.
Allstar Ratcheting Tie Downs have a 5000-lb maximum load rating (suggested working load is approximately half). These 2" x 8' ratcheting tie-downs are great for securing vehicles and equipment during transport. They have heavy-duty plated hardware and a ratchet that stores excess strap as it is pulled through when tightening. Choose from three hooks: flat, direct, or twist. Additionally, 049-ALL10196 has a built-in axle strap to wrap around the rear end housing or chassis.
Allstar Axle straps or winch straps work great for wrapping around the chassis or axle tubes when securing a vehicle to the trailer or when winching a vehicle. Adjustable protective sleeve (available as listed "Adjustable") can be positioned as needed to help prevent strap damage from sharp edges. The working load limit listed is the maximum load a strap should be subjected to during normal use.

![Heavy-Duty Nitrile Gloves [7 mils Thick, X-Large]](https://www.jegs.com/images/mini_200/500/555/555-1125.jpg)
![Rolling Work Table [200 lb. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-81420.jpg)