COCH-A1AX ProFit Combo Kit, 1967-76 Mopar A-body, For 81 OD

Name: COCH-A1AX ProFit Combo Kit, 1967-76 Mopar A-body, For 81 OD
Brand: AMERICAN POWERTRAIN
SKU: 632-COCH-A1AX
Price: 4175.25 USD
Availability: InStock

^$4,175²⁵$4395.00You Save$219.75

Ships on 09/17/2026

Lowest Price Guarantee

Mopar

1967-76 Mopar A-body
For 81 OD

Pro-Fit Combo Kit Is Designed for 1967-76 Mopar a-Body .81 OD, Providing a Clean Solution for Transmission Installation, Conversion, or Service Needs.
American Powertrain COCH-A1AX Features:
Tremec TKX TCET18084- 600ft-Lb Constant Load Rated, 2.87 1st, 1.89 2nd, 1.28 3rd, 1.00 4th, 5th .81OD AP Revolution Shifter Mechanism
Provides Short, Quick Shifting, Proper Shift Position Driveshaft Slip Yoke
Cryogenically Hardened Bolt-in Cross Member
Black Powder Coat, Ties to Torsion Bar Anchors for Better Torsional Rigidity Under Load Isolator Mount
Polyurethane Speedometer Solution
Mechanical and Electronic Conversion Pilot Bearing
American Powertrain COCH-A1AX Notes:
Tremec TKX TCET18084- 600ft-Lb Constant Load Rated, 2.87 1st, 1.89 2nd, 1.28 3rd, 1.00 4th, 5th .81OD AP Revolution Shifter Mechanism - Provides Short, Quick Shifting, Proper Shift Position Driveshaft Slip Yoke - Cryogenically Hardened Bolt-in Cross Member - Black Powder Coat, Ties to Torsion Bar Anchors for Better Torsional Rigidity Under Load Isolator Mount - Polyurethane Speedometer Solution - Mechanical and Electronic Conversion Pilot Bearing - Compatible with Manual and Automatic Cranks Conversion Release Bearing - Compatible with OE Clutch Fork Weatherseal Reverse Light Harness, Hardware, Complete Instructions and Warranty Note: Requires Engine Specific Bell Housing and 26-Spline Clutch Disc (sold Separately) Compatible with OE Shift Position or Console. Requires Tunnel and Torsion Bar Support Modification for Proper Installation.
Compatible with Manual and Automatic Cranks Conversion Release Bearing
Compatible with OE Clutch Fork Weatherseal Reverse Light Harness, Hardware, Complete Instructions and Warranty Note: Requires Engine Specific Bell Housing and 26-Spline Clutch Disc (sold Separately) Compatible with OE Shift Position or Console. Requires Tunnel and Torsion Bar Support Modification for Proper Installation.