
HP73M High-Performance Crate Engine
Items You Need
- Base Engine Build
- Intake Manifold
- Distributor
- Water Pump
- Harmonic Balancer
- Flex Plate
ATK Core Return Process
JEGS and ATK appreciate your business and want to ensure that your core return is as smooth as possible.Please CLICK HERE for ATK Core Return Process
NOTE:
- Core return can be any Small Block Chrysler 360ci engine
Engine Break-In Procedure
Use or break-in oil or conventional (non-synthetic) 10w30 oil with zinc additive for the first 500 miles of operation. Do not drive for long periods at any single speed, always vary your speed. Do not tow a trailer or put other heavy loads on the vehicle. It is best to avoid long periods of idling during this period. Check the engine oil and coolant levels daily.
Engines with flat tappet hydraulic cams only - Run the engine between 2,000 and 2,500 RPM's, with no-load on the engine for the first 30 minutes. Let the engine cool down completely and repeat process 2-3 more times. Do not idle the engine for any extended period at this time, this is critical to break in the camshaft.
At 500 Miles change the engine oil and filter using conventional (non-synthetic) oil with a zinc additive. Check fuel and ignition settings, adjust valves (where applicable). Drive the next 500 miles normally, without high RPM's (below 5000 RPM), hard use, or extended periods of high loading or long periods of idling.
Change the oil and oil filter again at 1,000 miles. Continue using conventional (non-synthetic) oils and zinc additive, until about 4,000 miles. At that point, you may run a quality 10w30 synthetic oil if you choose. Use of oil with zinc or a zinc additive for the life of your engine is recommended.
Emissions Note:
This part is only legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles or on vehicles used solely for the purposes of closed competition racing.
CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART
In 2007, ATK launched a High-Performance Division with one of the finest engine shops in the country. By reverse-engineering all of their engines, they are able to eliminate any OEM deficiencies. This makes an ATK built crate engine have a superior design over the original engine by incorporating better components when needed. These quality-built engines are offered in three different stages for ease of finishing an engine swap.
Show More
Give your classic Mopar the power it deserves with the ATK HP Crate Engines Small Block Chrysler 360ci / 320HP / 410TQ—a reliable and performance-driven solution for muscle car lovers, hot rod builders, and daily drivers alike. Designed to deliver a strong balance of horsepower and torque, this crate engine is a great choice for those seeking a streetable upgrade without sacrificing reliability.
This 360 ci engine is professionally assembled with high-quality internals, including hypereutectic pistons, a performance camshaft, and cast iron cylinder heads that optimize airflow and combustion. The result? A smooth and powerful 320 horsepower with 410 lb-ft of torque—perfect for street cruising, light towing, or spirited weekend drives.
Whether you're restoring a vintage Mopar or building a custom ride, this Mopar 360 crate engine offers a drop-in solution that eliminates the guesswork. It's dyno-tested for performance and durability, ensuring that what you see on paper is exactly what you get under the hood.
If you're searching for a dependable 360 crate motor for sale, ATK delivers unmatched craftsmanship, attention to detail, and USA-built quality. Every engine is backed by a warranty for added peace of mind and built to meet or exceed OEM specifications.
From muscle car revivals to classic truck upgrades, the ATK 360ci crate engine is the heart your build needs. Reliable, powerful, and ready to run—this small block brings big results.
![Break-In/Engine Oil Supplement [12 oz. Bottle]](https://www.jegs.com/images/mini_200/500/555/555-28060.jpg)
![Break-In Oil, 10W30 [1 Quart, 32 oz.]](https://www.jegs.com/images/mini_200/500/555/555-28067.jpg)
![HR-680-VS Hot Rod Series Carburetor 680 CFM 4150 Vacuum Secondaries [Polished]](https://www.jegs.com/images/mini_200/700/793/793-hr-680-vs.jpg)