AP-3R

The AP-3R is a 3-ton arbor press that has a heavy duty cast iron frame. This sheet metal forming arbor press machine is a ratchet leverage machine that allows the operator to get the most leverage out of each pull of the handle using a ratchet actuator. There is a rapid transfer flywheel that allows you to lift or lower the ram with great speed and it allows for small motions as well for set up before pressing the items at hand.

There is a machined four position bottom plate that is perfectly perpendicular to the ram that has the proper opening for most broaches to push through. This arbor press has a solid, case hardened ram for perfect presses every time and offers years of profitable duty at full capacity.
All Baileigh arbor presses can be bench or pedestal mounted. The AP-3R arbor press has a 5-inch throat opening and can handle material up to 11-inches high.

Show More

---

AP-5

The AP-5 arbor press can produce up to 5.6-tons of force. It has a heavy duty frame work that is a machined cast iron housing that uses a thick 2'' x 2'' case hardened ram. This is the perfect tonnage for any fabrication or machine shop for pressing bearings, bushings, or broaching keyways into items as well. As standard this 5.6-ton arbor press comes with a heavy duty four position bottom plate that is perfect for various sizes of broaches. This plate can also be removed for pressing other items directly on the massive frame work. Like all Baileigh arbor presses, this one can be pedestal or bench mounted.