Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
This product is no longer available. Please call customer service for assistance at 1-800-345-4545.
- Fuel Injection Control Module
- 2003-07 Ford 6.0L
- 58V
- Better Cold Starts
- Increased Horse Power
- Preprogrammed Unit
- Does Not Set Any Codes
6.0L OEM PurePower Injectors
Features:
These 6.0L OEM injectors are remanufactured to today's original equipment specifications. PurePower goes beyond all aftermarket rebuilders by replacing components typically reused such as the rail connections, thru-rod, nuts, washers, o-rings, springs and spool valves. - The Control Valve body and spool are both precision ground to specific diametrical clearance for sealing and directing oil for injector operation.
- All spools are replaced 100% and machined to original specification. All other competitors re-use these valves.
- Each injector is 100% flow tested and nitrogen tested for leaks.
- Flow volume, leakage rate, max needle lift and valve opening pressure (VOP) are also tested.
- All sealing surfaces are refinished and maintain less than 2 microns of flatness, which assures long life, high mileage and performance.
- The intensifier body is precision honed then matched with new plungers to operate at extreme pressures and temperatures.
- While the competition reuses old dampening pins and check plates, PurePower replaces both parts to prevent cavitation.
Forget the aftermarket rebuilders, buy a quality OEM injector at an aftermarket price.
58V Fuel Injection Control Module
The BD Diesel Fuel Injection Control Module for the Ford 6.0L is a remanufactured unit that solves common problems on stock units. It provides added power and eliminates frequent logic board errors. All units are cleaned, repaired and reassembled using 100% replacement components and 100% rework to eliminate any intermittent failures. All modules are tri-temp tested to ensure accurate and reliable operations.
