Product Discontinued

Aluminum Radiator 1940-42 Willys

Name: Aluminum Radiator 1940-42 Willys
Brand: BE COOL RADIATORS
SKU: 134-63155
Price: 849.99 USD
Availability: OutOfStock

Currently Unavailable

This product is no longer available. Please call customer service for assistance at 1-800-345-4545.

Automatic Transmission Applications

Polished Finish

1940-42 Willys
Driver Side Upper, Passenger Side Lower Hose
29''W x 18''H
Crossflow
Auto Trans

Polished Finish

Inlet Location & Size:	Driver Side / 1-1/2'
Outlet Location & Size:	Passenger Side / 1-3/4'
Core Type:	Dual
Radiator Height:	18'
Radiator Width:	28-1/2'
Radiator Thickness:	3'
Radiator Core Height:	18'
Radiator Core Width:	24'
Radiator Core Thickness:	2'
Notes: With passenger side water pump outlet Drilling required for some pin, foot, or flange mounted radiators Driver side upper hose location Passenger side lower hose location Includes built-in heavy duty transmission oil cooler

Upgrade to a Factory-Fit All Aluminum Radiator

O.E.M. radiators are just that, Original Equipment. They are designed to cool stock applications and overheating can quickly take the fun out of cruising your hot rod. Be Cool designs their radiators in the same ''Crossflow'' / ''Downflow'' configuration as the original radiator to avoid any installation issues but that is where the similarities stop! Crossflow radiators are constructed with their tanks on the sides, while a Downflow radiator has its tanks on the top and bottom of the core. A commonly asked question is: Which is better, a Crossflow or Downflow radiator? The answer: Both will cool the same as long as the core surface of the radiator is the same in square inches.

Cooling monster motors, especially when faced with common problems like tight spaces and small grille openings can be a challenge. Be Cool's cooling technology produces radiators that are 40% lighter than conventional O.E.M. units, yet have greater cooling power. These aluminum radiators feature a dual 1'' tube core, .080'' thick aluminum tanks. They are manufactured with OEM-sized inlets and outlets in the correct OEM locations. Additionally, they come with a billet filler neck and a brass petcock. Each radiator is 100% pressure tested before being shipped in expanding foam packaging. Their epoxy-free construction provides better heat dissipation, too, while allowing complete repairability. They are available in a natural aluminum or a mirror-polished finish that is real show stopper!
All Be Cool radiators are compatible with all coolants and 100% Made In The USA! They are Guaranteed to lower your coolant temperature a minimum of 20-degrees, or your money back! In fact most customers report even greater coolant temperature drops. If you have a stock vehicle think O.E.M., but if you have a performance vehicle you should consider Be Cool! Made In The USA.

Features: