Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
This product is no longer available. Please call customer service for assistance at 1-800-345-4545.
- Aluminum Radiator Module
- 1968-74 AMX/Javelin
- Downflow
- Auto Trans
- Rated for 700HP
- Polished Finish
Be Cool's Radiator Modules take the guesswork out of properly cooling your vehicle because every component in a Module Assembly has been carefully matched for peak efficiency. These modules include an aluminum radiator, single or dual electric fan(s), aluminum fan mounting brackets, an electric fan wiring harness w/temperature sending unit and 40 AMP waterproof relay, diamond-cut aluminum vented recovery tank, and a round billet Be Cool signature radiator cap.
Inlet Location & Size: Passenger Side / 1-1/2' Outlet Location & Size: Driver Side / 1-1/2' Core Type: Dual Radiator Height: 21' Radiator Width: 26' Radiator Thickness: 3' Radiator Core Height: 17' Radiator Core Width: 24' Radiator Core Thickness: 2' Notes: - Passenger side upper hose location
- Driver side lower hose location
- For engines with passenger side water pump outlet
- Built-in heavy duty trans fluid cooler
Upgrade to a Factory-Fit All Aluminum Radiator
O.E.M. radiators are just that, Original Equipment. They are designed to cool stock applications and overheating can take the fun out of cruising your hot rod or muscle car quickly. Be Cool designs their radiators in the same ''Crossflow'' / ''Downflow'' configuration as the original radiator to avoid any installation issues but that is where the similarities stop! Crossflow radiators are constructed with their tanks on the sides, while a Downflow radiator has its tanks on the top and bottom of the core. A commonly asked question is: Which is better, a Crossflow or Downflow radiator? The answer: Both will cool the same as long as the core surface of the radiator is the same in square inches.
Show More
Cooling monster motors, especially when faced with common problems like tight spaces and small grille openings can be a challenge. Be Cool's cooling technology produces radiators that are 40% lighter than conventional O.E.M. units, yet have greater cooling power. These aluminum radiators feature a dual 1'' tube core, .080'' thick aluminum tanks. They are manufactured with OEM-sized inlets and outlets in the correct OEM locations. Additionally, they come with a billet filler neck and a brass petcock. Each radiator is 100% pressure tested before being shipped in expanding foam packaging. Their epoxy-free construction provides better heat dissipation, too, while allowing complete repairability. They are available in a natural aluminum or a mirror-polished finish that is real show stopper!
All Be Cool radiators are compatible with all coolants and 100% Made In The USA! They are Guaranteed to lower your coolant temperature a minimum of 20-degrees, or your money back! In fact most customers report even greater coolant temperature drops. If you have a stock vehicle think O.E.M., but if you have a performance vehicle you should consider Be Cool!
Be Cool's Radiator Modules take the guesswork out of properly cooling your vehicle because every component in a Module Assembly has been carefully matched for peak efficiency. These modules include an aluminum radiator, single or dual electric fan(s), aluminum fan mounting brackets, an electric fan wiring harness w/temperature sending unit and 40 AMP waterproof relay, diamond-cut aluminum vented recovery tank, and a round billet Be Cool signature radiator cap.
Features:
- All Aluminum Construction
- Dual 1'' Tube Core
- Single Pass Design
- Billet Filler Neck with High Capacity Over Flow Tube
- Form-Folded Straight Tanks
- OE Inlet/Outlet Sizes and Location
- Custom Fit for Direct Replacement Mounting
- Automatic Transmission Radiators feature a Built-In Heavy Duty Cooler
- 100% Pressure Tested
- Durable Packaging
- Made In The USA
Items You Need
