Bio Kleen M01809 Features:

• A salt neutralizer that easily and safely removes salt buildup from any surface.
• Salt deposits are quickly neutralized, released and removed with each application.
• Surfaces will be clean and coated for protection against rust and salt corrosion.
• Will not remove Bio-Kleen Polish & Sealant, boat wax or regular waxes.

Bio Kleen M01809 Directions:

• Exterior Application: If necessary, remove excess debris to allow salt neutralizer to be applied directly onto surface.
• Prepare a solution by adding 8oz Salt Kleen to every 1 Gallon of water (1:15 dilution) into a bucket.
• Dip a wash brush or mitt into solution and scrub entire surface. Allow solution to dwell 1-2 minutes.
• Rinse with water completely removing salt debris.
• Interior Engine Application: Using a stainless steel proportioner at a 1:30 dilution ratio
• Attach output to engine flush supply.
• Turn water on and start engine.
• Allow to idle 3-5 minutes, or until you see Salt Kleen (yellow-green in color) coming out through exhaust pipes or lower unit.