Ford Small Block 306ci Dress Crate Engine 370HP 350TQ

Name: Ford Small Block 306ci Dress Crate Engine 370HP 350TQ
Brand: BLUEPRINT ENGINES
SKU: 138-BP3060CTF
Price: 7399.00 USD
Availability: OutOfStock

Currently Unavailable

This product is no longer available. Please call customer service for assistance at 1-800-345-4545.

Dress Engine

Holley Sniper EFI Fuel Injection
370HP / 350TQ
50 oz. External Balance

Engine Break-In Procedure
Use or break-in oil or conventional (non-synthetic) multi-viscosity oil with zinc additive for the first 500 miles of operation. Avoid hard acceleration for sustained periods. Periodically change the engine speed while driving to help seat the rings. While the engine is running, be sure to check oil pressure and coolant temperature, and check for fluid leaks, such as oil, transmission fluid, fuel, and coolant/antifreeze. Also listen for any unusual sounds. Should you hear an unusual sound, shut the engine off, check for the source, and correct it.
Engines with flat tappet cams only - Start the engine and bring it to 2,000 RPM. Get the engine running smoothly. Then vary the engine speed from 1,800-2,200 RPM in a slow acceleration/deceleration cycle for 30 minutes. This is necessary to provide adequate oil splash and lifter rotation to properly mate each lifter to its lobe.
At 500 Miles change the engine oil and filter using conventional (non-synthetic) oil. After 6,000 miles, synthetic oils can be used in your engine. For flat tappet cam engines, continued use of oil with zinc or a zinc additive for the life of your engine is recommended.

Blueprint Engines are a great choice for drivable and reliable high performance engines. All rotating assemblies are balanced within 2 grams on a computerized balancer. Blueprint Engines are dyno tested and include dyno sheets.
Best of all they feature a 30 month/50,000 mile warranty.

Recommended Stall Converter: 1800-2200 rpm
Recommended Fuel: 91 Octane

Block:

Seasoned 302ci Block (+.030'')
2-Bolt Main
1-Piece Rear Main Seal
Square and Parallel Decked
Align Honed Main Bearing Bore
Cylinders are Sonic Tested for Thickness
Cylinders Honed on a Computer Controlled Machine to within .0002'' Straightness and Roundness

Rotating Assembly:
Cast Steel Crank
3.000" Stroke
5.155" Connecting Rods
50 oz. 6.4" Diameter Harmonic Balancer (Not included with Base engine)
Hypereutectic Pistons
Hastings Moly Piston Rings
Melling High Volume Oil Pump
Cloyes Double Roller Timing Chain
9.5:1 Compression Ratio

Cylinder Heads:
Blueprint Aluminum Cylinder Heads
Hardened Retainers and Springs
2.02 Swirl Polished Intake Valves
1.60 Swirl Polished Exhaust Valves
58-60cc Combustion Chamber
190cc Intake Ports

Camshaft Specs:
Hydraulic Roller Cam (Blueprint recommends a steel distributor gear)
Duration @ .050'' Lift: 218° Intake / 226° Exhaust
Lift: .543'' Intake / .554'' Exhaust
Lobe Separation: 112°
Camshaft is degreed to ensure maximum horsepower

Timing Specifications:
Initial Timing: 10-16°
Total Timing: 32-34°
Firing Order: 1-3-7-2-6-5-4-8
Spark Plugs: Champion 792 with a .045" Gap Recommended (NOT Included)

Other Features:
New Dual Sump Oil Pan
New Timing Cover
New Valve Covers
Brass Freeze Plugs
Painted Ford Blue

Dress Model Includes:
Blueprint Dual Plane Satin Aluminum Finish Intake Manifold
Holley 600cfm Vacuum Secondary Carburetor or Holley Sniper EFI System
HEI Distributor & Coil
50oz. 6.40" Diameter Harmonic Balancer

"Drop In" Dress Model Includes:
Blueprint Dual Plane Satin Aluminum Finish Intake Manifold
Holley 600 cfm Vacuum Secondary Carburetor
9" Diameter Chrome Air Cleaner
HEI Distributor & Coil
Spark plug Wires & Plugs
Standard Rotation Water Pump, V-Belt style
Mechanical Fuel Pump & Stainless Steel Fuel Pump to Carb Supply Line
Chrome Water Neck
50 oz. 6.40" Diameter Harmonic Balancer

Additional Notes:
Requires a V-belt Standard Rotation Water Pump and Belt System
Recommended Oil: 10W30, Non-Synthetic
Recommended Flexplate / Flywheel: 50 Ounce Weighted
Not for EGR Applications
JEGS Easy Kits are designed by JEGS high-performance racing professionals to help you get all the performance parts you need for your race car, hot rod or truck.