First Mate Marine Long Block Engine, 2000-05 GM 262ci, Std. Rotation

Name: First Mate Marine Long Block Engine, 2000-05 GM 262ci, Std. Rotation
Brand: BLUEPRINT ENGINES
SKU: 138-GM262LJT
Price: 2150.99 USD
Availability: OutOfStock

Currently Unavailable

This product is no longer available. Please call customer service for assistance at 1-800-345-4545.

GM Marine Long Blocks

2000-05 GM 262ci Vortec Roller With Balance Shaft 200/230 HP
Standard Rotation
Block Casting Number O9OM
Head Casting Number 113
Comes With Oil Pan And Timing Cover Already Installed

Engine Break-In Procedure
Use or break-in oil or conventional (non-synthetic) multi-viscosity oil with zinc additive for the first 30 hours of operation. Avoid hard acceleration for sustained periods. Periodically change the engine speed to help seat the rings. While the engine is running, be sure to check oil pressure and coolant temperature, and check for fluid leaks, such as oil, fuel, and coolant/antifreeze. Also listen for any unusual sounds. Should you hear an unusual sound, shut the engine off, check for the source, and correct it.
Engines with flat tappet cams only - Start the engine and bring it to 2,000 RPM. Get the engine running smoothly. Then vary the engine speed from 1,800-2,200 RPM in a slow acceleration/deceleration cycle for 30 minutes. This is necessary to provide adequate oil splash and lifter rotation to properly mate each lifter to its lobe.
After 30 hours of operation change the engine oil and filter. For flat tappet cam engines, continued use of oil with zinc or a zinc additive for the life of your engine is recommended.

First Mate Marine Engines have exactly the power instrument you desire and need for your boat. Each of these engines is built with quality in mind using new Pistons and Moly Rings as well as a marine camshaft with lifters. First Mate Marine uses new Rod, Main, and Cam Bearings to even further ensure reliability of the engines. The Crankshaft and Connecting Rods are reconditioned by First Mate themselves and the Cylinder Heads are resurfaced with new valve springs, as well as three angle valve job. The Blocks are also resurfaced and bored and honed. First Mate Marine uses brand new HD Timing Chain and Gears as well as a new Oil Pump. Each Engine from First Mate Marine is spin tested and pressure tested giving you only the best quality marine engine available.

Part TypeEngine Long Block

Product LineFirst Mate Marine Longblocks

BrandBLUEPRINT ENGINES

Package Height27.0

Package Width30.25

Package Length30.5

Weight435.0 PG

Part CategoryPerformance Parts

Vendor Part NumberGM262LJT

Package Qty1

Package TypeEA

No Questions