
Blueprint Pro Series Small Block Chevy 454ci/575HP/560TQ Dress Engine
This product is no longer available. Please call customer service for assistance at 1-800-345-4545.
Blueprint Engines PS4540CTC Features:
Complete and ready to install, our dressed engines come complete with ignition, carburetor, water pump and even spark plugs. More complete than almost any other crate engine out there, our dressed models provide fast, easy installation. And because they are dyno tested, you can be sure all the components are working perfectly. * Some exceptions apply - please see individual crate engine specs for details- New World Products cast iron 4 bolt main
- 2 piece rear main seal
- 4.250" bore
Rotating Assembly: - Crankshaft: Forged, 4.000" Stroke
- Connecting Rods Forged: 6" Length
- Mahle forged pistons
- Mahle rings
- Compression: 10:1
- Bore/Stroke: 4.250"/4.000"
- Melling oil pump
- Cloyes double roller timing set
Cylinder Heads: - Blueprint 220cc Aluminum, 64cc chamber, Straight plug
- Comp Cams pushrods
- Comp Cams roller rocker arms
- Aluminum valve covers
Camshaft Specs: - Hydraulic Roller
- Duration @ .050'' Lift: 240 Intake / 248 Exhaust
- Lift: .577'' Intake / .577'' Exhaust
- Lobe Seperation: 112°
Dress Model Adds: - Carb: 1050cfm AED
- Balancer
- Distributor
- Aluminum Intake
- Oil pan
- Spark Plugs: Champion
- Spark Plug Wires: MSD
Note: Your BluePrint engine was dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.
- Part Number: PS4540CT
- Fuel Delivery Type: Carbureted
- Spark Plug: Champion 792
- Spark Plug Gap: .035"
- Harmonic Balancer: Non-Weighted
- Flexplate/Flywheel: Non-Weighted
- Intake Manifold: Single plane
- Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°
- Firing Order: 1-8-4-3-6-5-7-2
Blueprint Pro Series Engines are a great choice for drivable and reliable high performance engines. All rotating assemblies are balanced within 2 grams on a computerized balancer. Blueprint Pro Series Engines are dyno tested and include dyno sheets.
Best of all they feature a 30 month/50,000 mile warranty.
Recommended Stall Converter: 2200+ rpm
Recommended Fuel: 91 Octane

![Engine Stand [1000 lb. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-80040.jpg)

![Break-In/Engine Oil Supplement [12 oz. Bottle]](https://www.jegs.com/images/mini_200/500/555/555-28060.jpg)
![Engine Load Leveler [1,250 lb.]](https://www.jegs.com/images/mini_200/500/555/555-80048.jpg)


![Rotating Engine Stand [1000 lb. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-80059.jpg)
![Engine Stand [1250 lb. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-80041.jpg)