RSK031R Rear Suspension Kit, Non Adjustable w/Poly Bushings for 1982-2002 Chevy Camaro, Pontiac Firebird [Red]

Name: RSK031R Rear Suspension Kit, Non Adjustable w/Poly Bushings for 1982-2002 Chevy Camaro, Pontiac Firebird [Red]
Brand: BMR SUSPENSION
SKU: 142-RSK031R
Price: 199.95 USD
Availability: InStock

^$199⁹⁵

Ships on 09/25/2026

Lowest Price Guarantee

F-Body

Rear Suspension Kit

1982-2002 Chevy Camaro, Pontiac Firebird

Panhard Bar

Lower Control Arms

Non-Adjustable

Polychloroprene Bushings

Steel

Red

BMR RSK031R Features:

Launch harder, reduce wheel hop, and add cornering consistency on your 1982-2002 GM F-body with a non-adjustable Rear Suspension Kit from BMR Suspension. BMRs polyurethane, non-adjustable Rear Suspension Kit consists of a Panhard rod and lower control arms. Manufactured from heavy-duty 1 5/8-inch diameter, 0.120-inch wall, and 1-inch, 0.120-inch wall DOM steel tubing, the Rear Suspension Kit provides all the strength you?ll need for any performance application. BMRs Rear Suspension Kit (RSK031) uses greasable, 95-durometer, internally fluted polyurethane bushings, which add a more responsive feel over the factory rubber bushings. Designed to work well for street performance, drag race, and handling applications. The heavy-duty construction of the lower control arms and Panhard rod eliminate flex, giving you much improved repeatability on the street, starting line, or in the corners. This kit is the perfect upgrade for the enthusiast looking to improve performance, while maintaining acceptable NVH and ride quality. Installation time is 3-4 hours.

Increase The Rigidity Of Your GM Vehicle

The stock, factory equipped control arms on your vehicle are designed for everyday driving at lower speeds and will not hold up under track conditions. The OE bushings used with these control arms deflect and can cause the control arms to excessively flex under hard driving, greatly reducing your vehicle's handling. BMR's Rear Control Arms are the perfect solution to these problems. Combining high density polyurethane or Delrin bushings with solid steel, greatly increases your vehicle's handling and overall track performance.

Control Arm Relocation Brackets
Relocate your control arm rear mounting points and improve your car's instant center. These bolt-on or weld-in relocation brackets allow up to 3 different height adjustments (2", 3", or 4" drop over stock) for your lower rear control arm mount. Depending on the ride height of the vehicle, the increased control arm angle provides better weight transfer and decreases 60 foot times. Unlike other traction devices, these will work with OE and aftermarket rear ends.

Features