Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
![UCA1860R Non-Adjustable Rear Upper Control Arms Fits Select Ford Bronco [Red Powder Coat]](https://www.jegs.com/images/mini_750/100/142/142-uca1860r.jpg)
Vehicle Info NeededUCA1860R Non-Adjustable Rear Upper Control Arms Fits Select Ford Bronco [Red Powder Coat]
Ships Tomorrow
Lowest Price GuaranteeItems You Need
![Wheel Chock [Solid Rubber]](https://www.jegs.com/images/mini_200/500/555/555-w41001.jpg)
![3-Piece Wire Brush Set [Stainless Steel, Brass Bristles with Plastic Handle]](https://www.jegs.com/images/mini_200/500/555/555-w1149.jpg)
![Socket Set, 3/8 in. & 1/4 in. Drive [SAE/Metric 52-Piece]](https://www.jegs.com/images/mini_200/500/555/555-81565.jpg)
![LLK1860R Leveling Kit 1 in. Fits Select Ford Bronco [Red Powder Coat]](https://www.jegs.com/images/mini_200/100/142/142-llk1860r.jpg)
BMR SUSPENSION
Part Number : 142-LLK1860R
![LLK1861R Lift Kit 2 in. Fits Select Ford Bronco [Red Powder Coat]](https://www.jegs.com/images/mini_200/100/142/142-llk1861r.jpg)
BMR SUSPENSION
Part Number : 142-LLK1861R
![SG1860R Rear Shock Mount Skid Plates Fits Select Ford Bronco [Red Powder Coat]](https://www.jegs.com/images/mini_200/100/142/142-sg1860r.jpg)
BMR SUSPENSION
Part Number : 142-SG1860R
![PHR1860R Rear Panhard Bar for Select Ford Bronco [Red Powder Coat Finish]](https://www.jegs.com/images/mini_200/100/142/142-phr1860r.jpg)
BMR SUSPENSION
Part Number : 142-PHR1860R
![CV-2 Synthetic Grease with Organic Moly [14 oz Tube]](https://www.jegs.com/images/mini_200/800/816/816-80402.jpg)
![Penetrating Oil [11 oz. Aerosol Can]](https://www.jegs.com/images/mini_200/600/639/639-11043.jpg)
![Brake and Parts Cleaner [14 oz. Aerosol Can]](https://www.jegs.com/images/mini_200/500/555/555-72312.jpg)
![Fender Cover with Pocket [23 in. W x 31 1/2 in. L]](https://www.jegs.com/images/mini_200/500/555/555-65010.jpg)
![2-Ton Low-Profile Aluminum Floor Jack [4,000 lbs. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-80006.jpg)
BMR Suspension’s UCA1860R rear upper control arms for the Ford Bronco improve traction, stability, and handling both on and off the road. Built from heavy-duty materials and fitted with performance-grade bushings, these arms are ideal for lifted and performance-tuned Broncos.
BMR Suspension UCA1860H Rear Upper Control Arms Features:
- Non-adjustable design for precise OE-length replacement
- Fabricated from 1.625 in. x 0.120 in. wall DOM steel tubing for superior strength
- Equipped with high-durometer polyurethane bushings for improved control and minimal deflection
- Durable Red powdercoat finish resists corrosion
- Reduces axle movement and wheel hop during acceleration and off-road use
- Direct bolt-in upgrade—no welding or modifications required
- Designed to handle lifted and high-performance Bronco builds
BMR Suspension UCA1860R Rear Upper Control Arms Notes:
- Does Not Fit Bronco Sport
- Intended for use with stock or aftermarket rear lower control arms
- Polyurethane bushings may transmit more NVH compared to rubber
- Ideal for lifted vehicles and performance suspension setups
Increase Your Fords Suspension Performance
The stock control arms equipped on your vehicle are designed for everyday driving at lower speeds and will not hold up under track or trail conditions. The OE bushings used with these control arms deflect and can cause the control arms to excessively flex under hard driving, which greatly reduces vehicle handling. BMR Rear Control Arms are the perfect solution to such issues. Combining high-density polyurethane bushings, or steel spherical bearings, with solid steel controls greatly increases your vehicle's handling and overall performance.
