LM -12 Series Cylinder Heads As-Cast Intake Ports
Product Discontinued
BRODIXPART NUMBER: 158-1120002

LM -12 Series Cylinder Heads As-Cast Intake Ports

Currently Unavailable

This product is no longer available. Please call customer service for assistance at 1-800-345-4545.

LM -12 Series Cylinder Heads
  • As-Cast Runners and Combustion Chambers
    • LM -12 Series Cylinder Heads
    • As-Cast Intake Ports
    • As-Cast Combustion Chambers
    • 2.180'' Intake / 1.625'' Exhaust Valve Sizes
    • Angle Plug
    • Bare, 2/pkg.

      This head is sold as an unassembled bare casting. It will require professional porting of the runners and combustion chambers. It is finished machined on deck surfaces, inatke/exhaust flanges, etc. and includes valve guides and valve seats installed. This head does NOT include studs, valves, springs retainers or locks.

      Cylinder Head Specifications
    • Intake Port Volume: As-Cast (No Porting)
    • Combustion Chamber Volume: As-Cast
    • Valve Sizes: 2.180' Intake / 1.625' Exhaust ( 11/32' Stem Diameter )
    • Spark Plug Configuration: Angled

      Facts and Related Components
    • Torque Heads: 70 ft-lb.
    • Torque Rocker Studs: 40-45 ft-lb.
    • Intake Gasket: Brodix p/n 158-MG1215
    • Head Gasket: Fel-Pro p/n 375-1003 (350ci) / 375-1004 (400ci) or Cometic p/n 245-C5399 (350ci) / 245-C5403 (400ci)
    • Exhaust Gasket: Fel-Pro p/n 375-1407
    • Head Studs: Brodix SK HSSB 13 (Aluminum Block)
    • Spark Plug Specs: 14mm Thread, .750' (3/4') Reach, Gasket Seat
    • Valve Angle: 12°
    • Angle Milling: .0065' per cc
    • Flat Milling: .0055' per cc
    • Pushrod Slots: 85/134
    • Stud Girdle: N/A
    • Rocker Arms: Shaft System with 85/134 Spacing (Check heads for intake offset) - T&D 22076
    • Lifters: .180' Offset
    • Pistons: Special 12°
    • Pushrods: Special Length
    • Intake Face Angle: 5°
    • Exhaust Pattern: Standard and Stahl
    • Valve Centerline: 85/134
    • Spring Pockets: 1.550' Out of the Box, May be cut to 1.625' - No larger or deeper
    • Accessory Bolt Holes are Drilled
    • Recommended Intake Manifold: Edelbrock Victor 18° 2.9 Intake Manifold p/n 350-2955
    • Valley Plate: GM 24502652
    Part TypeCylinder Head
    BrandBRODIX
    Part CategoryPerformance Parts
    Part FitmentSemi Universal
    Vendor Part Number1120002
    Package Qty1
    Package TypeEA
    No Questions
    No Reviews
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning
    Your Cart

    Your shopping cart is empty!