Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Product Discontinued
Currently Unavailable
This product is no longer available. Please call customer service for assistance at 1-800-345-4545.
Canted Valve -14 Series Cylinder Heads265cc Intake Port
- Canted Valve -14 Series Cylinder Heads
- 265cc Intake Ports
- 54cc Combustion Chambers
- 2.200'' Intake / 1.600'' Exhaust Valve Sizes
- Angle Plug
- Bare, 2/pkg.
This head is sold as an unassembled bare casting. It is finished machined and hand ported. Also includes valve guides and valve seats installed. This head does NOT include studs, valves, springs retainers or locks.
Cylinder Head Specifications - Intake Port Volume: 265 (Hand Ported)
- Combustion Chamber Volume: 54cc
- Valve Sizes: 2.200' Intake / 1.600' Exhaust ( 11/32' Stem Diameter )
- Spark Plug Configuration: AngledFacts and Related Components
- Torque Heads: 70 ft-lb.
- Torque Rocker Studs: 40-45 ft-lb.
- Intake Gasket: Brodix p/n 158-MG1901
- Head Gasket: Fel-Pro p/n 375-1003 (350ci) / 375-1004 (400ci) or Cometic p/n 245-C5399 (350ci) / 245-C5403 (400ci)
- Exhaust Gasket: Brodix p/n 158-MG52464; Cometic p/n 245-C5424
- Head Studs: ARP p/n 070-234-4312
- Spark Plug Specs: 14mm Thread, .750' (3/4') Reach, Gasket Seat
- Valve Angle: 14° and 4° Intake; 10° and 2° Exhaust
- Angle Milling: N/A
- Flat Milling: .0050' per cc
- Pushrod Slots: Left Bare and Uncut
- Stud Girdle: N/A
- Rocker Arms: Shaft System - T&D 2240; Jesel KPS 06048
- Lifters: .180' Offset
- Pistons: Special for Brodix Canted Valve Heads
- Pushrods: Special Length
- Exhaust Pattern: Stahl only
- Valve Covers: Brodix VC 190
- Spring Pockets: 1.550' Out of the Box - No larger or deeper without calling Brodix direct for exceptions
- Accessory Bolt Holes are Drilled
- Recommended Intake Manifold: Brodix HV 1900
BrandBRODIX
Part CategoryPerformance Parts
Vendor Part Number1140000
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations
