Canted Valve -14 Series Cylinder Heads 265cc Intake Ports
Product Discontinued
BRODIXPART NUMBER: 158-1141000

Canted Valve -14 Series Cylinder Heads 265cc Intake Ports

Currently Unavailable

This product is no longer available. Please call customer service for assistance at 1-800-345-4545.

Canted Valve -14 Series Cylinder Heads
  • 265cc Intake Port
    • Canted Valve -14 Series Cylinder Heads
    • 265cc Intake Ports
    • 54cc Combustion Chambers
    • 2.200'' Intake / 1.600'' Exhaust Valves
    • 1.550'' Dia. Springs - 240# Seat Pressure
    • Titanium Retainers
    • Angle Plug
    • Assembled, 2/pkg.

      Cylinder Head Specifications
    • Intake Port Volume: 265cc
    • Combustion Chamber Volume: 54cc
    • Valves: 2.200' dia. x 6.200' o.a.l. Intake / 1.600' dia. x 6.090' o.a.l. Exhaust (Stainless Steel) ( 11/32' Stem Diameter )
    • Valve Springs: 1.550' Diameter - Open Pressure: 550 lbs.; Closed Pressure: 240 lbs.; Installed Height: 1.950'; Max Lift: .700'
    • Spring Retainers: 1.550' 10° Titanium
    • Rocker Studs: N/A - Shaft System Required
    • Guide Plates: N/A
    • Valve Seals: 11/32'
    • Spark Plug Configuration: Angled

      Facts and Related Components
    • Torque Heads: 70 ft-lb.
    • Torque Rocker Studs: 40-45 ft-lb.
    • Intake Gasket: Brodix p/n 158-MG1901
    • Head Gasket: Fel-Pro p/n 375-1003 (350ci) / 375-1004 (400ci) or Cometic p/n 245-C5399 (350ci) / 245-C5403 (400ci)
    • Exhaust Gasket: Brodix p/n 158-MG52464; Cometic p/n 245-C5424
    • Head Studs: ARP p/n 070-234-4312
    • Spark Plug Specs: 14mm Thread, .750' (3/4') Reach, Gasket Seat
    • Valve Angle: 14° and 4° Intake; 10° and 2° Exhaust
    • Angle Milling: N/A
    • Flat Milling: .0050' per cc
    • Pushrod Slots: Left Bare and Uncut
    • Stud Girdle: N/A
    • Rocker Arms: Shaft System - T&D 2240; Jesel KPS 06048
    • Lifters: .180' Offset
    • Pistons: Special for Brodix Canted Valve Heads
    • Pushrods: Special Length
    • Exhaust Pattern: Stahl only
    • Valve Covers: Brodix VC 190
    • Spring Pockets: 1.550' Out of the Box - No larger or deeper without calling Brodix direct for exceptions
    • Accessory Bolt Holes are Drilled
    • Recommended Intake Manifold: Brodix HV 1900
    BrandBRODIX
    Part CategoryPerformance Parts
    Vendor Part Number1141000
    Package Qty1
    Package TypeEA
    No Questions
    No Reviews
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning
    Your Cart

    Your shopping cart is empty!