
CS-D3-PF-CS-19-PW Pathfinder Lift System 2.0 in. Lift Fits Select Ram 2500 Power Wagon 4x4
- Adjustable Track Bar
- Radius Arm Brackets
- Rear Coil Springs
This Pathfinder Lift System provides a 2.0 in. front lift for select Ram 2500 Power Wagon 4x4 models and is designed for excellent on-road comfort with light to moderate off-road capability. Positioned between the Backcountry and Pintop systems, the Pathfinder delivers improved suspension control, increased travel, and a composed daily-driving experience.
CS-D3-PF-CS-19-PW Pathfinder Lift System Features:
- Provides approximately 2.0 in. of front lift
- Increases usable suspension travel by approximately 50 percent over stock
- Taller, lighter-rate front coils improve ride comfort and compliance
- Carli SPEC 2.5 in. remote reservoir shocks improve damping and heat management
- Adjustable front track bar recenters the front axle
- Radius arm drop brackets restore caster and axle position
- Rear geometry corrections reduce axle yaw and improve stability
- Supports up to 37 in. tires with proper wheel fitment
- Designed for daily-driven trucks with light to moderate off-road use
CS-D3-PF-CS-19-PW Pathfinder Lift System Includes:
- CS-DEL-R-14 - Rear Sway Bar End Links
- CS-DFBD-1 - Front Bump Stop Drops
- CS-DLRC-14-H - Front Linear-Rate Coil Springs
- CS-DMRC-14-R1 or R2 - Rear Multi-Rate Coil Springs
- CS-DATB-1419 - Adjustable Track Bar
- CS-DRAD-1419 - Radius Arm Drop Brackets
- CS-DPWSKIDBLK-14 - Power Wagon Skid Plate Drop Bracket
- CS-DRBD-AL - Rear Bump Stop Drops
- CS-D3SPKG-CS25RR-D - Carli SPEC 2.5 Remote Reservoir Shocks, Front and Rear
- CS-DVDBRKT-19 - Harmonic Damper Relocation Bracket
Do-It-All Lift Systems Tuned for Comfort, Control, and Capability
The Carli Suspension Pathfinder System is built for daily-driven trucks that need improved ride quality and stability on-road, with the confidence to handle light to moderate off-road use. These systems pair tuned shocks, matched springs, and geometry-correcting components to improve suspension control, reduce unwanted axle movement, and maintain proper alignment at ride height. Pathfinder kits are offered in multiple configurations to match vehicle setup and rear spring selection, delivering a balanced blend of performance and drivability.
![Fender Cover with Pocket [23 in. W x 31 1/2 in. L]](https://www.jegs.com/images/mini_200/500/555/555-65010.jpg)


![2-Ton Low-Profile Aluminum Floor Jack [4,000 lbs. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-80006.jpg)

![Wheel Chock [Solid Rubber]](https://www.jegs.com/images/mini_200/500/555/555-w41001.jpg)
![3-Piece Wire Brush Set [Stainless Steel, Brass Bristles with Plastic Handle]](https://www.jegs.com/images/mini_200/500/555/555-w1149.jpg)
![Socket Set, 3/8 in. & 1/4 in. Drive [SAE/Metric 52-Piece]](https://www.jegs.com/images/mini_200/500/555/555-81565.jpg)

![Breaker Bar [1/2 in. Drive, 30 in. L]](https://www.jegs.com/images/mini_200/500/555/555-w32126.jpg)
![1/2 in. Drive Torque Wrench [10 to 150 ft. lbs.]](https://www.jegs.com/images/mini_200/500/555/555-m200db.jpg)



