

SB-3334PM Front Sway Bar for 1933-1934 Ford (Pinto Mustang IFS)
Items You Need
- Front Sway Bar
- For 1933-1934 Ford (Pinto Mustang IFS)
Chassis Engineering SB-3334PM Features:
SB-3334PM Front Sway Bar for 1933-1934 Ford (Pinto Mustang IFS). Front sway bar fits P/M IFS, stock width front ends when installed in your 1933-1934 Ford. This is an excellent way to improve the handling. All hardware linkage included.
If you are using non-Chassis Engineering full lower A-arms (no strut rods), please include part AU-0010PMA with your order of your Pinto Mustang Swaybar for no additional cost. We will substitute weld-on sway bar mounting tabs in place of the regular Pinto Mustang mounting brackets.
Chassis Engineering Sway Bars For Better Handling And Reduced Road Sway
Chassis Engineering sway bars are built to improve handling, drivability, and stability for classic cars, trucks, hot rods, and performance builds. Available in front, rear, universal, and vehicle-specific kits, they include linkage and mounting hardware to simplify installation and help reduce body roll. With steel construction, sttractive finishes, and applications for Ford, GM, and universal setups, these sway bar kits are a trusted suspension upgrade for tighter control and a more confident ride.
![Breaker Bar [1/2 in. Drive, 30 in. L]](https://www.jegs.com/images/mini_200/500/555/555-w32126.jpg)
![Wheel Chock [Solid Rubber]](https://www.jegs.com/images/mini_200/500/555/555-w41001.jpg)
![Penetrating Oil [11 oz. Aerosol Can]](https://www.jegs.com/images/mini_200/600/639/639-11043.jpg)
![Heavy-Duty Nitrile Gloves [7 mils Thick, Large]](https://www.jegs.com/images/mini_200/500/555/555-1124.jpg)


![2-Ton Low-Profile Aluminum Floor Jack [4,000 lbs. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-80006.jpg)


![Brake and Parts Cleaner [14 oz. Aerosol Can]](https://www.jegs.com/images/mini_200/500/555/555-72312.jpg)
![1/2 in. Drive Torque Wrench [10 to 150 ft. lbs.]](https://www.jegs.com/images/mini_200/500/555/555-m200db.jpg)