V4 All in One Polish cuts away light imperfections, scratches, and swirls, finishes like a fine polish, restores lustrous shine and deep reflection, then adds a layer of protection in just one step.

Use This Polish To: 

• Produce exceptional shine in no time
• Protect your paint with premium sealants
• Add durable protection against the elements
• Save time by polishing and sealing at once
• Cut hard and refine the finish in one easy step

Polish And Correct Paint In Less Time

Full polishing jobs can take countless hours. With V4, an entire car can be polished in a few hours in just one pass. For cars with light to moderate swirl marks, scratches, and defects, V4 is the perfect polish that compounds and finishes in one step. The diminishing abrasives cut fast to remove swirls, scratches, and oxidation, then finish like a fine polish to create a wet mirror finish!

Polish + Shine + Seal

A newly polished surface needs to be protected, which is why V4 lays down a layer of sealant with every pass of your DA or rotary machine. V4 adds synthetic sealant technology to seal and protect the surface from contamination, UV rays, bird droppings, insects, and water spots. Full polishing detail jobs can take countless hours. Use V4 for a mirror finish and durable protection in just one pass! 

Dual Action Polisher

1. 1. Shake well and apply 4-5 drops to desired pad. 
2. 2. Prime pad with Pad Conditioner. Dab product out evenly across a 2' x 2' section. 
3. 3. Turn on the machine on the paint to speed setting 1 to spread the product. 
4. 4. Increase speed to 5-6 and using moderate pressure, work area in 2-3 passes until the product becomes clear.
5. 5. Follow with light pressure to finish. 
6. 6. Remove residue with a clean microfiber towel.
7. 7. Please Note: Always try a test spot before use. 

Rotary Polisher

1. 1. Shake well and apply 4-5 drops to desired pad. 
2. 2. Prime pad with Pad Conditioner. Dab product out evenly across a 2' x 2' section. 
3. 3. Turn on the machine away from the paint to a setting in between 1000-1500 rpms to spread the product. 
4. 4. Using just the weight of the machine (no pressure) work area in 3-4 passes until the compound becomes clear.
5. 5. For the final pass adjust the speed setting to between 1200-1800 rpms.
6. 6. Work until optical clarity is achieved.
7. 7. Remove residue with a clean microfiber cloth.