Free Shipping!

When it comes to performance innovations that save time, money and guesswork, Chevrolet Performance once again leads the way!

Chevrolet Performance pioneered the concept of crate engines more than four decades ago, and continues to lead the industry with their unprecedented Connect & Cruise crate powertrain systems - factory-engineered engine and transmission combinations that include all the electronic control modules, wiring harnesses and other key components.

Chevrolet Performance engineers matched the engines and transmissions for optimal performance and durability, so you can wring out every horsepower from them with total confidence! The specially calibrated controllers are designed for retrofit installations in older vehicles, for easier and quicker installation and operation without the need for third-party tuning.
The convenience of a crate engine, the assurance of factory validate performance and the value of an inclusive package - that's what you get with Chevrolet Performance's Connect & Cruise crate powertrain systems.

Each kit delivers a fully assembled crate engine, transmission, electronic control module, and the engine control hardware to get it all running in your project vehicle - including the mass airflow sensor, oxygen sensors and even the special throttle pedal for the engines' electronic throttle bodies.

Chevrolet Performance engineers matched the engines with their respective transmissions, ensuring they are up to the task of channeling big power with absolute dependability. The engine controller is specially calibrated to run the engine without some of the production-vehicle features that aren't required in an older vehicle. That means no "trouble" codes and no need for third-party tuning, "plug-and-play" installation that is quick, easy and intuitive. Detailed instructions outline all the necessary steps.

The engineers did all the hard work of designing and calibrating perfectly matched powertrain systems - and they covered them with a 24-month/50,000-mile limited warranty.

LT376/535 376ci / 6.2L, 535HP / 470TQ Engine
This crate engine is architecturally similar to the LT1 and LS family of small-block engines, but with a unique block casting, cylinder head design, oiling system, and more. It retains the advanced technologies of the LT1, such as direct injection, which enables more precise fuel delivery control and higher compression (11.5:1) that turns into huge horsepower.

This engine was designed for use in race vehicles and builds on the LT family's technologies and takes them to the next level, leveraging CNC-ported heads and the high-lift LT1 Hot Cam bringing 535 naturally aspirated horsepower. Oh and this engine loves to rev as well easily towards 6,800 rpm.

This crate engine from Chevrolet is just another example of Chevrolet utilizing their racing knowledge and putting it right into their products for the public. This crate engine kit includes the engine assembly with a production intake manifold, throttle body assembly, ignition coils, water pump, balancer and much more.

Specifications:

• Engine Type: Direct injection spark ignition Gen V Small-Block V8
• Displacement: 376ci (6.2L)
• Bore x Stroke: 4.065'' x 3.622'' (103.25 x 92mm)
• Block: Cast aluminum with 6-bolt nodular iron main bearing caps
• Crankshaft: Forged steel with 8-bolt flange
• Connecting Rods: Forged powdered metal
• Pistons: Hypereutectic aluminum
• Compression Ratio: 11.5:1
• Camshaft Type: Billet steel roller
• Valve Lift: .577'' intake/ .577'' exhaust
• Camshaft Duration (@.050 in.): 228° intake / 248° exhaust
• Cylinder Heads: Aluminum, CNC-Ported Rectangular Port Direct Injection with 58cc Combustion Chambers
• Valve Size: 2.130'' intake / 1.590'' exhaust
• Rocker Arms: Investment-cast, roller trunnion
• Rocker Arm Ratio: 1.81:1
• Recommended Fuel: Premium pump
• Maximum Recommended RPM: 6600
• Reluctor Wheel: 58X
• Balanced: Internal

Engine Control Modules and Harnesses
A precisely calibrated engine control module is essential to making your fuel-injected LT engine perform in your older vehicle - and Chevrolet Performance is your source for controllers that are designed for easy, "plug-and-play" installation and, in most applications, no need for third-party tuning adjustments.
Unlike production controllers that may or may not come with a used engine, these controllers are calibrated for installation in older vehicles. That means many of the features required for late-model production vehicles are "turned off", because they're not required in older cars and trucks. That means features that may trigger a diagnostic trouble code and possibly affect performance - requiring additional tuning - are not enabled.
These inclusive kits deliver all the components required to plug into the engine and get it running - from the controller itself and the accompanying wire harness to the mass airflow sensor, oxygen sensors and even a throttle pedal assembly for engines equipped with an electronic throttle body. The kits also include detailed instructions to help you do it right the first time, even if you have no experience.

Most Engine Control Modules Kits Include:

• Oxygen sensors & mounting bosses (for installation in the exhaust system)
• Mass airflow meter & mounting boss (for installation in the air intake system)
• Throttle pedal assembly (for use with the electronically operated throttle)
• Specific oil pressure sensor that is compatible with the harness (when needed)
• Complete wiring harness with fuse box and necessary cam sensor and MAP sensor jumpers
• Programmed controller
• Instruction sheet

Each Chevrolet Performance controller kit is a true stand-alone system. All that's needed to get a vehicle running with it are power and ground sources, a high-pressure fuel pump and an electric cooling fan.

T56 Super Magnum Six-Speed Manual Transmission
The Chevrolet Performance T56 Super Magnum Six-Speed Manual Transmission is a high-torque capacity TREMEC six-speed manual. Specially designed for custom, retro-fit installations with Chevrolet Performance crate engines. The exterior case similar to fourth-generation F-body transmission with the stronger, high-capacity gear sets, input shaft and output shaft used in the TREMEC TR6060. It also features a 40-tooth reluctor ring that's necessary for use with electronic vehicle speed sensors used with Chevrolet Performance controllers.

Features:

• 700 lb.-ft. Maximum Torque Capacity
• 26-Spline Input Shaft
• 31-Spline Output Shaft
• Gear Ratios: 2.66 (1), 1.78 (2), 1.30 (3), 1.00 (4), 0.80 (5), 0.63 (6)
• Slip-Yoke Design
• Two-Position Shifter Plate Included, With Third Position Built Into The Transmission

LT / T56 Super Magnum Installation Kit
Get your new T56 Magnum bolted to your new engine with this T56 Super Magnum installation kit. Kit includes all the correct components that Chevrolet Performance offers to easily mate your new engine and trans.

Installation Kit Includes:

• Super Magnum Bell Housing Kit
• Hydraulic Throw-out Bearing
• Clutch Actuator to Trans Bolts
• Bell Housing to Trans Bolts
• Flywheel to Crankshaft Bolts
• Clutch Disc & Pressure Plate Set, 14" Diameter, 168-Tooth SFI-approved Aluminum Flywheel
• Crankshaft Pilot Bearing
• Instruction Sheet
• Rated for 800 ft/lbs of torque
• Does not include clutch master cylinder

Each Crate Powertrain System Includes:

• Fully assembled crate engine
• Transmission & Install Kit
• Calibrated engine control module
• Oxygen sensors and mounting bosses (for installation in the exhaust system)
• Mass airflow meter and mounting boss (for installation in the air intake system)
• Throttle pedal assembly (for use with the electronically operated throttle)
• Assembled wiring harness with fuse box and necessary cam sensor and MAP sensor jumpers
• Oil pressure sensor that is compatible with the harness
• Instruction sheet

GM Warranty