$5 off $49+/$20 off $249+/$60 off $499+/$120 off $999+* Use Promo Code: EARLY26

Made in USA
1000-6-B Black-Out Mighty Prime High Pressure Oil Priming System w/6 in. Bracket
InfoVehicle Info Needed
CLEAR VIEW FILTRATIONPART NUMBER: 126-1000-6-B

1000-6-B Black-Out Mighty Prime High Pressure Oil Priming System w/6 in. Bracket

$49995
2 left in stock
ShippingShips Today
Lowest PriceLowest Price Guarantee

Items You Need

Aluminum Weld Fitting -10AN Male

JEGS

Aluminum Weld Fitting -10AN Male

Part Number : 555-15264
$569$6.99
You Save$1.30
597110 Weld-In Bung [-10 AN]

FRAGOLA PERFORMANCE SYSTEMS

597110 Weld-In Bung [-10 AN]

Part Number : 305-597110
$1199
Pro-Flo 200 Series Stainless Steel Braided Hose -8 AN [6 ft.]

JEGS

Pro-Flo 200 Series Stainless Steel Braided Hose -8 AN [6 ft.]

Part Number : 555-100921
$2999$32.99
You Save$3.00
AN 90-Degree Max Flow Swivel Hose End [-8 AN Female to -8 AN Hose, Black]

JEGS

AN 90-Degree Max Flow Swivel Hose End [-8 AN Female to -8 AN Hose, Black]

Part Number : 555-110022
$1699$18.99
You Save$2.00

6-Inch
Black-Out Mighty Prime Oil Priming System
  • Includes Bracket for 6 in. Filter Assembly
  • Can be Remote Mounted
  • Prime Engine Quick & Easy w/Cordless Drill
  • Compatible w/All Filter Systems
  • Wet or Dry Sump Engines
  • Eliminates Dry Startups

    Clear View Filtration 1000-6-B Mighty Prime High-Pressure Oil Priming System Includes:

    • Completely assembled Mighty Prime with -10 inlet fitting and one-way check valve installed
    • Primer mounting bracket with mounting bolts and directions
    • -12 O-Ring to -8 AN fitting

    Clear View Filtration 1000-6-B Mighty Prime High-Pressure Oil Priming System Features:

    • Easily prime your oil system with a 5/16 in. socket and a cordless drill
    • Recommended for all Gasoline and Alcohol engines
    • Also recommended for pickup diesel engines, including Cummins, Duramax, and Power Stroke
    • Reduces engine part wear and failures by allowing high-pressure priming without running the engine
    • Small but powerful unit generates pressure comparable to engine start-up levels
    • System mounts directly to the vehicle
    • Draws oil from the oil pan or a dry sump tank using a -10 hose
    Wet Sump Applications:
    • Requires a -10 fitting (not included) welded to the oil pan
    • Oil is drawn from the pan using a -10 line (not included) into the Primer's side inlet fitting
    • Oil is pumped through the Primer body and exits via the one-way check valve on the bottom
    • A -8 line (not included) runs from the check valve to an unused port in the top of the See Through Filter assembly
    • One-way check valve prevents oil backflow when the engine is running
    • Includes a -12 O-Ring Boss to -8 AN fitting for the filter inlet port
    • Compatible with any filter system
    Dry Sump Applications:
    • Oil is drawn from the dry sump tank using a -10 line into the Primer’s side inlet fitting
    • A -10 fitting may need to be welded onto the tank if no extra port exists
    • Oil is pumped through the Primer and exits through the bottom check valve
    • A -8 line routes oil from the check valve to the unused port in the filter top
    • Includes a -12 O-Ring Boss to -8 AN fitting for the filter inlet port
    • If both inlet ports are in use, a T-fitting must be plumbed into one of the inlets or feed lines
    Important Warnings:
    • This high-pressure, high-volume Primer can empty 4 or more quarts of oil from the tank
    • Always warm up the engine after priming before running or dyno testing
    • Never run the Priming Pump while the engine is running – it may cause damage
    Without a Clear View Filter:
    • The system can be mounted remotely to suit any engine bay layout
    • Must feed the inlet side of the main filter system
    • Ensure proper oil flow direction through disposable filters to avoid damage
    • Never plumb into the block oil galley after the disposable filter
    • Primer must be installed before the disposable filter on the unfiltered oil side
    • If no block plug is available before the filter, switch to a remote filter system
    Mounting Instructions:
    • Bracket mounts to the bottom of the Mighty Prime housing and a 4 in. Clear View Filter using supplied bolts
    • Mounts the Primer next to the filter, extending approx. 2.25 in. from the filter’s edge
    • If not mounting to a Clear View Filter, user can fabricate tabs to use the bracket alone
    • Clear View Filtration Part 470 Bracket (sold separately) can be added for remote mounting
    • Safe Effective Engine Priming

      Clear View Filtration Mighty Primers do not use the main oil lines and make bypass pressure of 80 PSI or more. They easily mount to Clear View filters or underhood and operate using a cordless drill with a 5/16 in. socket. The system draws oil from a dry sump tank or the oil pan on wet sump setups and feeds it into the inlet side of the filter system.

    Part TypeOil Pump Primer
    Product LineClear View Filtration Mighty Prime High-Pressure Oil Priming Systems
    BrandCLEAR VIEW FILTRATION
    Package Height2.15
    Package Width8.35
    Package Length10.5
    Weight1.69 PG
    Part CategoryPerformance Parts
    MaterialBillet Aluminum
    Part FitmentSemi Universal
    FinishBlack Anodized
    Vendor Part Number1000-6-B
    Package Qty1
    Package TypeEA
    No Questions
    No Reviews

    REPLACEMENT PARTS

    1001 Replacement O-Ring & Seal Kit for Mighty Prime Oil Priming Systems

    CLEAR VIEW FILTRATION

    1001 Replacement O-Ring & Seal Kit for Mighty Prime Oil Priming Systems

    Part Number : 126-1001
    $1595
    1006-B Black-Out Mighty Prime 6 in. Mounting Bracket Kit

    CLEAR VIEW FILTRATION

    1006-B Black-Out Mighty Prime 6 in. Mounting Bracket Kit

    Part Number : 126-1006-B
    $3995
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning