Comp Cams 405-205-17 Stage 3 Hydraulic Roller Camshaft Features:

• Intended for engine swaps into lighter vehicles
• Capable of over 600 horsepower on pump gas
• Requires Comp Cams Valve Spring Kit 7230GCS-KIT (sold separately)
• Requires Comp Cams Phaser Limiter 5473 (sold separately)
• Testing with the phaser limiter kit resulted in 100 + HP, 25 ft.-lb torque gains
• ECU tuning required

Comp Cams 405-205-17 Stage 3 Hydraulic Roller Camshaft Specs:

• Computer Controlled Compatible: Yes
• Valve Springs Required: Yes
• Maximum Advance at Camshaft: 5 deg
• RPM Operating Range: 2500-6700
• Grind Number: GLS295HR17
• Cam Type: Hydraulic Roller
• Camshaft Series: Godzilla
• Usage: Street
• Advertised Intake Duration: 295 deg.
• Advertised Exhaust Duration: 308 deg.
• Intake Duration at .050 in. Lift: 237 deg.
• Exhaust Duration at .050 in. Lift: 250 deg.
• Intake Valve Lift: 0.671 in.
• Exhaust Valve Lift: 0.671 in.
• Lobe Lift Intake: 0.373 in.
• Lobe Lift Exhaust: 0.373 in.
• Lobe Separation: 117
• Intake Centerline: 112
• Exhaust Close ATDC: 3 deg.
• Intake Open BTDC: 6 deg.
• Exhaust Open BBDC: 67 deg.
• Intake Close ABDC: 51 deg.
• Direct Injection Compatible: No
• VVT Compatible: Yes
• Phaser Requirement: Limiter

Emissions Note:

Thispart is only legal for sale and use on Uncontrolled (Non-Emissions Controlled)Vehicles or on vehicles used solely for the purposes of closed competitionracing.

CLICK THIS LINK FOR IMPORTANTCARB & EPA EMISSIONS INFORMATION ABOUT THIS PART