Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Vehicle Info NeededCOMP CAMSPART NUMBER: 249-CL54-412-11
CAM LIFTER KIT LS1 XR265HR-14
$59595
1 left in stock
Ships Tomorrow
Lowest Price GuaranteeXFI RPM Hydraulic Roller Camshafts
- XFI RPM Hydraulic Roller Cam and Lifter Kit
- Lift: .522''/.529''
- Duration: 265°/271°
- Lobe Separation Angle: 114°
- RPM Range: 1200-6000
Good torque and very strong mid-range power. Good preformance cam.Operating Range: 1200-6000 RPM Duration Advertised: 265° Intake / 271° Exhaust Duration @ .050': 212° Intake / 218° Exhaust Valve Lift w/1.7 Rockers: .522' Intake / .529' Exhaust Lobe Separation Angle: 114° GM, 4.8, 5.3, 5.7, 6.0, 6.2, 7.0, LS1, LS2, LS3, LS4, LS6, LS7, LSA, LS9, Camaro, Silverado, LS Swap, 383, 350, SBC, Chevelle, Yukon, L92, LM7, 325, GMC, Trailblazer, Corvette, GM LS, GEN III, GEN 3, GEN IV, GEN 4, DOD, AFM, VVT, BTR, Texas Speed
Good torque and very strong mid-range power. Good performance cam.
GM Gen III/LS1/LS2/LS6 1997-PRESENT (Three-Bolt)
Emissions Note:
This part is only legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles or on vehicles used solely for the purposes of closed competition racing.
CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART
Part TypeCamshaft Kit
BrandCOMP CAMS
Package Height3.5
Package Width5.8
Package Length25.3
Weight15.1 PG
Part CategoryPerformance Parts
Exh. Duration @ .050 In. (Deg)218
Cam StyleHydraulic roller tappet
Grind NumberXR265HR
Exh. Duration Advertised (Deg)271
Locks IncludedNo
Engine Make/SizeChevy 350 LS6
Retainers IncludedNo
Intake Valve Lift With Factory Rocker Arm Ratio (I0.522
Int. Duration @ .050 In. (Deg)212
Assembly Lubricant IncludedNo
Basic Operating Rpm Range1,200-6,000
Pushrods IncludedNo
Gaskets IncludedNo
Rocker Arms IncludedNo
Intake Valve Lift0.522 in (13.259 mm)
Computer-Controlled CompatibleNo
Int. Duration Advertised (Deg)265
Lobe Separation (Deg)114
Rpm Range1200-6000
Lifter StyleHydraulic roller
Advertised Duration265 int./271 exh.
Exhaust Valve Lift With Factory Rocker Arm Ratio (0.529
Valve Springs IncludedNo
UsageStreet/Performance
Valve Lift With Factory Rocker Arm Ratio0.522 int./0.529 exh.
Camshaft Gear Attachment3-bolt
QuantitySold as a kit
Valve Stem Seals IncludedNo
Exhaust Valve Lift0.529 in (13.437 mm)
Advertised Intake Duration265
Intake Duration At 050 Inch Lift212
Exhaust Duration At 050 Inch Lift218
Timing Chain And Gears IncludedNo
Advertised Exhaust Duration271
Lifter TypeHydraulic Roller
Duration At 050 Inch Lift212 int./218 exh.
Valve Springs RequiredYes
Lifters IncludedYes
Vendor Part NumberCL54-412-11
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations
