Xtreme Energy 260H Hydraulic Flat Tappet Camshaft Small Kit Lift: .444"/.444" Duration: 260/260 RPM Range: 1000-5000
InfoVehicle Info Needed
COMP CAMSPART NUMBER: 249-SK18-123-4

Xtreme Energy 260H Hydraulic Flat Tappet Camshaft Small Kit Lift: .444"/.444" Duration: 260/260 RPM Range: 1000-5000

$41195
ShippingShips on 10/23/2026
Lowest PriceLowest Price Guarantee

Chevrolet 4.3 Liter 262 c.i. 90° 6 CYL. 1980-1997
    Xtreme Energy 260H Hydraulic Flat Tappet Camshaft Small Kit
    Lift: .444"/.444"
    Duration: 260/260
    RPM Range: 1000-5000

  • Good cam for highway use, off road and towing.
  • Good for trucks with low axle ratios.

    90 Degree V6; 4.3: 262; Chevrolet 262; Chevrolet 4.3L; LB1; LB4; L35; LF6; S10; Blazer; S10 Blazer; S15; Sonoma; GMC; Safari; Astro Van; Safari; GMC Safari; Silverado


    Good cam for highway use, off-road and towing. Good for trucks with low gear ratios.

Emissions Note:

This part is only legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles or on vehicles used solely for the purposes of closed competition racing.

CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART

Part TypeCamshaft Kit
BrandCOMP CAMS
Package Height5.0
Package Width10.5
Package Length26.0
Weight16.5 PG
Part CategoryPerformance Parts
Exh. Duration @ .050 In. (Deg)212
Cam StyleHydraulic flat tappet
Grind NumberC6 260H-10
Exh. Duration Advertised (Deg)260
Locks IncludedNo
Engine Make/SizeChevy 262
Retainers IncludedNo
Intake Valve Lift With Factory Rocker Arm Ratio (I0.444
Int. Duration @ .050 In. (Deg)212
Assembly Lubricant IncludedYes
Basic Operating Rpm Range1,000-5,000
Pushrods IncludedNo
Gaskets IncludedNo
Rocker Arms IncludedNo
Intake Valve Lift0.444 in (11.278 mm)
Computer-Controlled CompatibleNo
Int. Duration Advertised (Deg)260
Lobe Separation (Deg)110
Rpm Range1000-5000
Lifter StyleHydraulic flat tappet
Advertised Duration260 int./260 exh.
Exhaust Valve Lift With Factory Rocker Arm Ratio (0.444
Valve Springs IncludedNo
UsageStreet/Performance
Valve Lift With Factory Rocker Arm Ratio0.444 int./0.444 exh.
QuantitySold as a kit
Valve Stem Seals IncludedNo
Exhaust Valve Lift0.444 in (11.278 mm)
Advertised Intake Duration260
Intake Duration At 050 Inch Lift212
Exhaust Duration At 050 Inch Lift212
Timing Chain StyleDouble non-roller
Timing Chain And Gears IncludedYes
Advertised Exhaust Duration260
Lifter TypeHydraulic Flat Tappet
Duration At 050 Inch Lift212 int./212 exh.
Valve Springs RequiredYes
Lifters IncludedYes
Vendor Part NumberSK18-123-4
Package Qty1
Package TypeEA
No Questions
No Reviews

Items You Need

Magnum Roller Rocker Arms Chevy 4.3L V6 200-262

COMP CAMS

Magnum Roller Rocker Arms Chevy 4.3L V6 200-262

Part Number : 249-1412-12
$17195
159 Engine Break-In Oil Additive [12-Ounce]

COMP CAMS

159 Engine Break-In Oil Additive [12-Ounce]

Part Number : 249-159
$2395
Some parts are not legal for use in California or other states with similar laws / regulations
p65 warning
Your Cart

Your shopping cart is empty!