Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Vehicle Info NeededCOMP CAMSPART NUMBER: 249-SK18-415-8
Magnum Hydraulic Roller Camshaft Small Kit Chevy 4.3L V6 1980-97 Lift: .500"/.500"
$1,07695
Ships on 09/16/2026
Lowest Price GuaranteeChevrolet 4.3 Liter 262ci 90° 6 Cyl. 1980-1997Retro Fit for Computer Controlled Vehicles
- Magnum Hydraulic Roller Camshaft Small Kit
- Lift: .500"/.500"
- Duration: 266°/270°
- Lobe Separation Angle: 112°
- RPM Range: 1200-4500
- Works with throttle body and sequential port injection with aftermarket chip.
- Good low end, mid-range.
90 Degree V6; 4.3: 262; Chevrolet 262; Chevrolet 4.3L; LB1; LB4; L35; LF6; S10; Blazer; S10 Blazer; S15; Sonoma; GMC; Safari; Astro Van; Safari; GMC Safari; Silverado
Works with throttle body and sequential port injection with aftermarket chip. Good low end, mid-range.
Chevy 4.3L V6 1980-97
Emissions Note:
This part is only legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles or on vehicles used solely for the purposes of closed competition racing.
CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART
Part TypeCamshaft Kit
BrandCOMP CAMS
Package Height5.0
Package Width10.5
Package Length26.0
Weight15.0 PG
Part CategoryPerformance Parts
Exh. Duration @ .050 In. (Deg)215
Cam StyleHydraulic roller tappet
Grind Number266HR
Exh. Duration Advertised (Deg)270
Locks IncludedNo
Engine Make/SizeChevy 262
Retainers IncludedNo
Intake Valve Lift With Factory Rocker Arm Ratio (I0.5
Int. Duration @ .050 In. (Deg)210
Assembly Lubricant IncludedNo
Basic Operating Rpm Range1,800-5,000
Pushrods IncludedNo
Gaskets IncludedNo
Rocker Arms IncludedNo
Intake Valve Lift0.5 in (12.7 mm)
Computer-Controlled CompatibleYes
Int. Duration Advertised (Deg)266
Lobe Separation (Deg)112
Rpm Range1800-5000
Lifter StyleHydraulic roller
Advertised Duration266 int./270 exh.
Exhaust Valve Lift With Factory Rocker Arm Ratio (0.5
Valve Springs IncludedNo
UsageStreet/Strip
Valve Lift With Factory Rocker Arm Ratio0.500 int./0.500 exh.
QuantitySold as a kit
Valve Stem Seals IncludedNo
Exhaust Valve Lift0.5 in (12.7 mm)
Advertised Intake Duration266
Intake Duration At 050 Inch Lift210
Exhaust Duration At 050 Inch Lift215
Timing Chain StyleDouble roller
Timing Chain And Gears IncludedYes
Advertised Exhaust Duration270
Lifter TypeHydraulic Roller
Part FitmentSemi Universal
Duration At 050 Inch Lift210 int./215 exh.
Valve Springs RequiredYes
Lifters IncludedYes
Vendor Part NumberSK18-415-8
Package Qty1
Package TypeEA
No Questions
No Reviews
Items You Need
![159 Engine Break-In Oil Additive [12-Ounce]](https://www.jegs.com/images/mini_200/200/249/249-159.jpg)
Some parts are not legal for use in California or other states with similar laws / regulations
