

Replacement Weld-In EGT Probe, 3/16 in. K-Type Thermocouple with 1/8 in. NPT Bung, 10 ft. Lead
Items You Need
This replacement weld-in EGT probe works with the EGT Plus series and the DataMaxx data logger. It has a 3/16 in. diameter probe, a 1/8 in. pipe thread weld-in bung and an approximately 10 ft. lead.
Computech 4110 EGT Sensor Features:
- 3/16 in. diameter probe
- 1/8 in. pipe thread weld-in bung and compression fitting are included
- Compression fitting centers the probe tip in the tube
- Lead is approximately 10 ft. with a male K-type connector and can be shortened for the installation
- For gasoline, racing gas, ethanol, methanol and nitro mixtures
- Not for diesel, which requires the diesel exhaust gas sensor
- Tune With Confidence
Now you can monitor your exhaust gas temperature without the expense of an onboard computer system or without the danger of trying to read an analog pyrometer at finish line speeds. With the Computech Systems EGT System you can tune your fuel system with confidence to maintain the performance edge and consistency you need to be a winner. Professional engine builders have long utilized exhaust gas temperature readings to determine proper jetting and achieve maximum performance without the worry of being too lean and causing expensive engine damage. That advantage is now available to you also. You can also gain consistency - engines that are jetted properly will run more consistently on the track.
![14-Gauge Premium Automotive Wire Black [50 ft.]](https://www.jegs.com/images/mini_200/500/555/555-10800.jpg)


![Heavy-Duty Nitrile Gloves [7 mils Thick, Large]](https://www.jegs.com/images/mini_200/500/555/555-1124.jpg)



![Crimp Connector Kit [160 Pieces]](https://www.jegs.com/images/mini_200/500/555/555-10705.jpg)


![Nylon Wire and Cable Ties [8 in. Black]](https://www.jegs.com/images/mini_200/500/555/555-10605.jpg)
![Electrical Tape [3/4 in. x 60 ft.]](https://www.jegs.com/images/mini_200/500/555/555-w502.jpg)