Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Product Discontinued
CRANE CAMSPART NUMBER: 271-134052
Energizer Hydraulic Flat Tappet Camshaft & Lifter Kit 1963-76 Ford/Mercury 352-428 FE - 1800-5200 RPM Range
Currently Unavailable
This product is no longer available. Please call customer service for assistance at 1-800-345-4545.
1963-76 Ford/Mercury 352-428 FE
- Energizer Hydraulic Flat Tappet Camshaft & Lifter Kit
- 1963-76 Ford/Mercury 352-428 FE
- Lift: .533 in./.533 in.
- Duration: 272 deg/272 deg
- RPM Range: 1800-5200
*Note: Specify if late 1962 406ci or 1963-76 block is used, as the cam is different than the one used in 1958-62 blocks.GOOD IDLE, DAILY USAGE, OFF ROAD, HIGHWAY TOWING, FUEL EFFICIENCY PLUS PERFORMANCE, 2600-3000 CRUISE RPM, 8.75 TO 10.5 COMPRESSION RATIO ADVISED.
Grind Number: 272 H10 Operating Range: 1800-5200 RPM Duration Advertised: 272° Intake / 272° Exhaust Duration @ .050' Lift: 216° Intake / 216° Exhaust Valve Lift w/1.76 Rockers: .533' Intake / .533' Exhaust Lobe Separation Angle: 110° Max Lift Angle: 105° ATDC Intake / 115° BTDC Exhaust Open/Close @.050' Cam Lift: Intake - 3° BTDC (opens) / 33° ABDC (closes)
Exhaust - 43° BBDC (opens) / (7°) BTDC (closes)
Part TypeCamshaft Kit
BrandCRANE CAMS
Package Height2.5
Package Width3.75
Package Length26.0
Weight14.64 PG
Vendor Part Number134052
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations
