Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Product Discontinued
CRANE CAMSPART NUMBER: 271-700-0020
Optical Trigger For XR700 & XR3000 Point Conversion Ignition Systems
Currently Unavailable
This product is no longer available. Please call customer service for assistance at 1-800-345-4545.
Optical Trigger
- Optical Trigger
- For XR700 & XR3000 Point Conversion Ignition Systems
Note: Requires installation kit, sold separately.
- LED status light for easy diagnostics
- 150% greater spark gap energy over stock points ignition
- Uses high-output coil without ballast resistor
- Optical trigger for precise ignition timing accuracy
- Fully sealed for protection from dirt, moisture, and vibration
- SMT (Surface Mount Technology) for reduced size and greater reliability
- Short circuit protection
- 50-State Legal (CARB E.O. #D-225-52)Specifications
- Operating Voltage:
6 to 18 volts, reverse polarity protected, negative ground - Coil Current Limit: 4.5 amps internal short circuit protection (limit set at 7 amps)
- RPM Range: 6,500 RPM
- Primary Voltage Output: 400 volts (inductive discharge)
- Primary Energy Output: 90 millijoules with PS91 coil
- Peak Spark Gap Current: 100 milliamps with PS91 coil
- Spark Duration: 2800 microseconds at 2,000 RPM
- Dimensions: 5" L x 3" W x 1-1/2" H
- Weight: 1-1/2 pounds
Note: Not compatible with 6-volt electrical systems, as these may drop below 4 volts during cranking
The high-performance version of Crane Cams XR700, the XR3000 converts points-type distributors to electronic ignition.
Features
Product LineCrane Cams XR3000 Points-to-Electronic Ignition Systems
BrandCRANE CAMS
Package Height4.0
Package Width4.1
Package Length5.9
Weight0.2 PG
Vendor Part NumberBBLV-700-0020
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations
