EWP115 Electric Water Pump Aluminum Housing LCD EWP & Fan Digital Controller Combo Kit 12V

Name: EWP115 Electric Water Pump Aluminum Housing LCD EWP & Fan Digital Controller Combo Kit 12V
Brand: DAVIES CRAIG
SKU: 317-DC-8950
Price: 378.93 USD
Availability: InStock

^$378⁹³

1 left in stock

Ships Tomorrow

Lowest Price Guarantee

Aluminum Housing
12-Volt Motor

Aluminum Housing
-16 AN Internal Thread
30.4 Gallon Per Minute Flow Rate

12-Volt

Take total control of your engine cooling with the Davies Craig EWP115 Aluminum Electric Water Pump and LCD EWP/Fan Digital Controller. The Controller will also manage the operation of your Thermatic Fan. The EWP115 (115 litres per minute) pump is suitable for small, medium, large, high-performance and 4WD vehicles. It’s a performance product that improves engine cooling control and capacity whilst giving you more power and torque and improved fuel economy.

The LCD EWP/Fan Digital Controller will manage both the EWP and Thermatic fan operation. The Digital Controller will vary the speed of the EWP in response to the engine’s coolant temperature. Multiple temperature settings are provided on the Controller for either maximum power or fuel efficiency.

The Thermatic Fan/s will be activated automatically once the engine coolant rises 5.4°F (3°C) above the targeted (set) temperature. The Digital Controller will automatically run on for three minutes (or to 14°F / 10°C below the set temperature) after engine shut down, eliminating ‘heat soak’ and extending engine life.

The EWP115 Digital Controller Combo is supplied in a do-it-yourself kit with everything you need for fitment to your vehicle’s engine, including an easy-to-follow DIY instruction booklet.

KIT CONTENTS
DESCRIPTION	UNITS
EWP115 Aluminum 12 Volt Pump	1
EWP/FAN LCD Controller	1
Hose Clamps	4
Rubber Adaptor Sleeves	4
Wiring Harness (10A Fuse)	1
Inline Adaptor	1
EWP115 Combo Hardware Bag	1
Instructions	1

Technical Specifications EWP115
Voltage	12 Volt Pump
Operating Voltage	3V DC to 15V DC
Maximum Current	10A @ 13V
Flow Rate (Max)	115 L/min (30.38 US gal/min) @ 13V DC
Operating Temp.	-40° to 130°C (-40° to 266°F)
Pump Design	Clockwise centrifugal with volute chamber
Pump Weight	920 grams (2.3 lb)
Pump Material	Aluminum(Powder Coated)
Burst Pressure	500 kPa (72.5 psi)
Seal	Ceramic face seal
Fits Hose Sizes	35mm to 51mm (1-3/8” to 2”) -16 AN Internal Thread(Inlet & Outlet)

Technical Specifications LCD Controller
Voltage Range	12V DC to 29V DC
Display LCD Size	70mm (2.76”) x 60mm (2.36”)
Maximum current	12A
Warning Alarm	High & low Temp., Above set temp., Sensor short circuit, Pump error, High & low voltage and Sensor open circuit
Targeted Set Temp Range	Singular degrees from: 60°C (140°F) to 100°C (212°F)
Memory	Set & targeted temperature
Fan Cut-in Temp	3°C (5.4°F) above the targeted (set) temperature
Controller Type	PCB with micro-processor
Sensor Type	Thermister in housing
Overrun / Shutdown	10°C (14°F) below set/target temperature or 3 minutes
Indicators	Temperature, Power, EWP, Test, Fan, High & low temp, Voltage, Above set temperature (with alarm)
Weight	100 grams (3.5 oz)
Dimensions	Length = 95mm (3.7") Width = 130mm (5.1") Depth = 25mm (1")