Electric Fuel Pump for 1990-2017 Kia
InfoVehicle Info Needed
DELPHIPART NUMBER: 117-FE0351

Electric Fuel Pump for 1990-2017 Kia

$10652
8 left in stock
ShippingShips Today
Lowest PriceLowest Price Guarantee

Fuel Pumps
Electric Fuel Pump
  • 1990-2017 Kia, Hyundai, Honda & Jeep
  • Fuel Type: Gas
  • Average Current Draw: 5 amps
  • Average Flow Rating: 29 GPH
  • Inlet Outside Diameter: 11 mm
  • Outlet Quantity: 1

    This electric fuel pump restores fuel pressure to the factory-specified range on 1990-2017 Kia, Hyundai, Honda & Jeep.

    Electric Fuel Pump Specs:

    • Average Current Draw: 5 amps.
    • Average Flow Rating: 29 GPH.
    • Connector Gender: Female.
    • Connector Shape: Rectangle.
    • Fuel Sending Unit Included: No.
    • Fuel Type: Gas.
    • Gasket or Seal Included: No.
    • Grade Type: Premium.
    • Inlet Outside Diameter: 11 mm.
    • Inlet Type: Strainer.
    • Internal or External: Internal.
    • Length: 113 mm.
    • Maximum Amperage Draw: 5 amps.
    • Maximum Pressure: 85 psi.
    • Minimum Pressure: 44 psi.
    • Mounting Bracket Included: No.
    • Mounting Hardware Included: Yes.
    • Negative Ground: No.
    • Outlet Outside Diameter: 0.313 in.
    • Outlet Quantity: 1.
    • Outlet Type: Hose Bead.
    • Position(s): In-Tank.
    • Pump Design: Turbine.
    • Regulator Included: No.
    • Seal and Lock Ring Included: No.
    • Strainer Included: No.
    • Terminal Gender: Male.
    • Terminal Quantity: 2.
    • Terminal Type: Pin.
    • Voltage: 12 volts.
    • Wire Quantity: 0.
    • Wiring Harness Included: No.
  • Part TypeElectric Fluid Pump
    BrandDELPHI
    Package Height3.25
    Package Width4.12
    Package Length6.75
    Weight0.88 PG
    Part CategoryReplacement Parts
    Item GradeStandard Replacement
    Outlet Size0.313 in (8 mm)
    Amp5
    Terminal Type2 Pin Connector
    Connector Shape/TypeMale
    Inlet TypeStrainer
    Strainer IncludedNo
    Pump TypeTurbine
    Flow Rate29 gal/hr
    Package ContentsElectric FP, Isolator, Hose, 2 Clamps, Pall Nut, Instruction Sheet
    Relief Pressure85 psi
    Type/SeriesIn-Tank
    Meets Or Exceeds Original Equipment Manufacture SpecificationsYes
    Gasket/Seal IncludedNo
    Outlet TypeHose Bead
    Part FitmentDirect Fit
    Volts12 vDC
    System Pressure44 psi
    Vendor Part NumberFE0351
    Package Qty1
    Package TypeEA
    No Questions
    No Reviews
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning
    Your Cart

    Your shopping cart is empty!