$5 off $49+/$20 off $249+/$60 off $499+/$120 off $999+* Use Promo Code: EARLY26

Made in USA
50211 ATAC (Advanced Thermal Acoustic Coating) Spray-On Coating to Control Heat & Sound [15 oz.]
InfoVehicle Info Needed
DESIGN ENGINEERING INC.PART NUMBER: 186-50211

50211 ATAC (Advanced Thermal Acoustic Coating) Spray-On Coating to Control Heat & Sound [15 oz.]

$1957$24.99You Save$5.42
4 left in stock
ShippingShips on Nov 23, 2026
Lowest PriceLowest Price Guarantee

Items You Need

50213 ATAC (Advanced Thermal Acoustic Coating) Urethane Seam Sealer for Heat & Sound Control [Black]

DESIGN ENGINEERING INC.

50213 ATAC (Advanced Thermal Acoustic Coating) Urethane Seam Sealer for Heat & Sound Control [Black]

Part Number : 186-50213
$2899
50297 ATAC (Advanced Thermal Acoustic Coating) Red Oxide Primer to Prime and Seal Metal Surfaces [1-Quart]

DESIGN ENGINEERING INC.

50297 ATAC (Advanced Thermal Acoustic Coating) Red Oxide Primer to Prime and Seal Metal Surfaces [1-Quart]

Part Number : 186-50297
$3899
51900 Spot Weld Chisel

LISLE TOOLS

51900 Spot Weld Chisel

Part Number : 616-51900
$1799
68670 2 Piece Spot Weld Cutter Set

SPC

68670 2 Piece Spot Weld Cutter Set

Part Number : 827-68670
$2999

Coatings
ATAC Spray-On Coating
  • 1-Step Solution to Heat & Sound Control
  • Reflects Heat to 375 Degrees F
  • Hi-Tech Ceramic Sphere Technology
  • Perfect for Small Areas or Touch-Up
  • Non-Toxic
  • Water Soluble
  • Convenient 15 oz. Aerosol
  • Sold Individually

    DEI 50211 ATAC Spray-On Coating Features:

    • Reflects Heat to 375 Degrees F
    • Hi-tech ceramic sphere technology dampens outside noise & vibration
    • Ideal for small jobs or touch-up
    • Non-toxic
    • Water soluble
    • Easy-to-use aerosol spray
    • Expected Coverage: 12 sq. ft.
    • Adheres to metal, fiberglass, and plastic

    DEI 50211 ATAC Spray-On Coating Notes:

    • Surface should be clean and free from oil, grease, wax, and contaminants
    • Rust should be removed or treated
    • Bare metal should be primed using DEI red oxide primer 50297 or equivalent (sold separately)
    • Painted surfaces should be sanded prior to applying
    • Do not apply in temperatures below 60 Degrees F (Do not let freeze)

    DEI 50211 ATAC Spray-On Coating Application Procedure:

    • Shake can well before use
    • Spray can upside down until nozzle clears for storage
    • Test in a small area
    • Galvanized surfaces must be primed
    • Apply uniform wet coat of 12-16 mill
    • A second coat can be applied if needed
    • Allow 12 hour dry time between coats
    • Allow 24 hours @ 70°F to cure before covering with any materials or applying heat from engine/exhaust systems
    • High-humidity and lower temperatures may increase dry time
    • Do not force dry with heat
    • Cleans up easily with hot water and soap
    • Cutting-Edge Heat and Noise Reduction

      DEI Advanced Thermal Acoustic Coatings (ATAC) are non-toxic, water-soluble sound and heat barriers that dampen exterior heat, noise, and vibration to transform your vehicle's interior into a comfortable and quiet ride.

    Part TypeThermal Acoustic Insulation
    Product LineDesign Engineering Inc. ATAC Coatings
    BrandDESIGN ENGINEERING INC.
    Package Height2.6
    Package Width2.6
    Package Length10.12
    Weight1.25 PG
    Part CategoryAccessories
    Mixing RequiredNo
    Application MethodAerosol
    Internal Or External UseInternal
    Volume15 oz.
    Surface Preparation RequiredYes
    Dry ColorGray
    Part FitmentUniversal
    Compatible SurfacesPrimed
    Vendor Part Number50211
    Package Qty1
    Package TypeEA
    No Questions
    No Reviews

    ITEM YOU MAY ALSO CONSIDER

    50208 ATAC Thermal Coating [1 Gallon]

    DESIGN ENGINEERING INC.

    50208 ATAC Thermal Coating [1 Gallon]

    Part Number : 186-50208
    $11999
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning