Dynatrac JT301X5310L5 Features:

The Dynatrac 3 in. Suspension Lift System 5 is designed for the driver looking to drastically improve the performance and ride quality of their vehicle. Made for adding lift height, shock damping, and wheel travel to the JT at lower cost.

• 3 in. front lift height and 1.38 in. of rear lift over stock
• Fits 35 in. tires (37 in. with optional extended bump stop spacer kit, Part # DT922071)
• 3 in. front, 2 in. rear increase in wheel travel
• Improves on and off-road ride quality over stock
• Dual rate front coil springs with lifetime guarantee against sagging/breakage
• 2.5 EnduroSport shocks with Jeep JT specific valving offer greater shock damping and performance
• Adjustable front sway bar links and rear sway bar brackets eliminate sway bar bind
• 100% bolt-on system makes for an easy install
• Tested under rigorous off-road conditions to validate tune, performance, strength, and durability
• Maximum Lift Front: 3 in.
• Maximum Lift Rear: 1.38 in.
• OEM Wheels & Tires Fitment: Yes
• Recommended Aftermarket Wheels: 17x8.5 in. w/ 4.5 in. Backspace / -6mm Offset
• Recommended Aftermarket Tires: 35 x 12.50 (37 x 12.50 with optional extended bump stop spacer kit PN: DT922071)
• TECH NOTE: Dynatrac's advertised lift heights are based around a typical Jeep JT build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher than advertised if installed on a stock weighted vehicle.
• TECH NOTE: Springs are NOT rated for use with models equipped with EcoDiesel engines.
• TECH NOTE: Jeep Gladiator Mojave also requires heim spacer kit, part # DT9611070