Eastwood 16257ZP Features:

Rust Encapsulator Platinum is a high-performance, moisture cured coating that encapsulates and stops rust from spreading. Three times Stronger than Original Rust Encapsulator Metallic Silver Finish Apply Directly Over Surface Rust Heat Resistance to 350 Degrees F Apply with Brush or Spray Rust Encapsulator Platinum can be used as a top coat or can be top coated with almost any paint. It can be applied over bare metal or surface rusted areas. Brush or spray applied with conventional spray equipment. Rust Encapsulator Platinum is ideal for any type of rusted metal surface and can withstand temperatures up to 350 degrees F.

• Single component aluminum pigmented coating
• 67% solids by weight
• Proprietary additive increases product adhesion to rusted steel substrates—unmatched by competitive coatings
• One coat assures maximum protection
• Can be brush, roller, or spray applied
• Paint Gun: HVLP gravity or siphon with a 1.4 minimum needle/nozzle
• Re-coatable after 4 hours; if top coating after 48 hours, scuff surface with 320 grit paper
• 2 hours, tack free
• Easy to apply
• Topcoatable with virtually any high-quality coating
• Maximum service temperature of 350° Fahrenheit**Recommended Substrates and Prep:**
• Apply product as a primer/encapsulator over clean or corroded (rusted) steel or cast iron
• Prep surface by mechanically cleaning loose flaking rust with a stiff brush or wire brush/wheel
• Remove any grease, oils, or other surface contaminants with a solvent such as PRE or Acetone
• Apply by brush, roller, or spray