Eastwood 16258ZP Features:

Rust Encapsulator Platinum is a high-performance, moisture cured coating that encapsulates and stops rust from spreading. Three times Stronger than Original Rust Encapsulator Metallic Silver Finish Apply Directly Over Surface Rust Heat Resistance to 350 Degrees F Apply with Brush or Spray Rust Encapsulator Platinum can be used as a top coat or can be top coated with almost any paint. It can be applied over bare metal or surface rusted areas. Brush or spray applied with conventional spray equipment. Rust Encapsulator Platinum is ideal for any type of rusted metal surface and can withstand temperatures up to 350 degrees F.

• Single component aluminum pigmented coating
• 67% solids by weight
• Proprietary additive increases product adhesion to rusted steel substrates, unmatched by competitive coatings
• 1 coat assures maximum protection
• Application methods: brush, roller, or spray
• Recommended paint gun: HVLP gravity or siphon with a 1.4 minimum needle/nozzle
• Re-coatable after 4 hours; if top coating after 48 hours, scuff surface with 320 grit paper
• Tack free in 2 hours
• Easy to apply
• Topcoat compatible with virtually any high-quality coating
• Maximum service temperature of 350° Fahrenheit
• Recommended substrates: clean or corroded (rusted) steel or cast iron
• Surface preparation: mechanically clean loose flaking rust with a stiff brush or wire brush/wheel
• Remove grease, oils, or other surface contaminants with a solvent such as PRE or Acetone
• Apply by brush, roller, or spray