Eastwood 20566 Features:

Get started with TIG welding is easy with the Eastwood TIG 200 DC welder. Designed for DIY enthusiasts, this compact 200-Amp TIG welder is capable of welding both mild and stainless steel up to 1/4-in. thick without the cost of an AC inverter. Its DC inverter power supply provides output ranging from 10- to 200-Amps, ideal for a wide variety of repair and fabrication projects. The TIG 200 DC is easy to set up and use. Equipped with power-sensing circuitry, it automatically adjusts to power inputs from 110V to 240V, letting you plug it in almost anywhere. The handheld torch includes an on/off switch to start the arc and a remote foot pedal controls amperages for precise welding control. A high-frequency start guarantees an instant arc strike with no tungsten contamination. Pre-flow and post-flow gas settings are pre-programmed at 0.5 sec (pre) and 5 sec (post) for convenience. Compact and lightweight (just 18-lbs), the TIG 200 DC is exceptionally portable. It can also work as a stick welder in DC positive/negative mode. Does NOT weld aluminum. And its all backed up by Eastwoods 3-year warranty and lifetime tech support. Eastwood TIG 200 DC

Features:

• DIY-friendly welder handles both mild and stainless steel up to 1/4-in thickDC power inverter delivers between 10 and 200 amps for a range of project needsIncludes hand-held torch with on/off switch for reliable startsRemote foot pedal infinitely controls amperage for precisionHigh-frequency start ensures instant arc strike with no tungsten contaminationPower-sensing internal circuitry automatically adjusts to power outlets from 110-240VFactory-programmed shielding gas pre-fow and post-flow for convenienceCan also stick weld in DC +/- modeLightweight design weighs just 18 lbsBacked by Eastwood's no-hassle return policy and 3-year warranty
  • Overall Dimensions: 16.9-in. (430mm) x 7.3-in. (185mm) x 12-in. (306mm)
  • Approximate Weight: 18 lbs. (8.16kg)
  • TIG Rated Duty Cycle: 120VAC 60%@145 Amps, 220VAC 60%@190 Amps
  • TIG Output Amperage Range: 10-145A DC, 10-2000A DC
  • TIG Pre Gas Flow: 0.5 Sec
  • TIG Post Gas Flow: 5 Sec
  • STICK Rated Duty Cycle: 120VAC 60%@140 Amps, 220VAC 60%@185 Amps
  • STICK Output Amperage Range: 10-140A, 10-185A
  • Maximum Output No Load Voltage: 56V
  • DC Power Cord Receptacle Plug: NEMA 6-50R
  • Unit Dimensions: 14.5-in. Long x 12.25-in. Tall x 7-in. Wide
  • Duty Cycle Explanation: The rated Duty Cycle refers to the amount of welding that can be done within a specific time frame.
  • Eastwood TIG 200 DC Duty Cycle: 60% at 190 Amps
  • Welding Time Blocks: Consider welding time in blocks of 10 Minutes, with Duty Cycle as a percentage of that time.
  • Example: At 190 Amps with a 60% Duty Cycle, you can weld for 6 Minutes in a 10 Minute block, followed by 4 Minutes of cooling.
  • Increasing Duty Cycle: To increase the duty cycle, lower the Amperage Output control.
  • Higher Amperage Effect: Welding above 190 Amps will result in a lower duty cycle.