Eastwood 31264 Features:

The Eastwood 5/16 [8mm] Spot Weld Drill makes drilling out spot welds for panel removal a less tedious and much safer job! Makes spot-weld drilling safer, faster and much easier Automatic bit advance feature with sturdy backing hook Precise cutting depth adjustment allows drilling through outer panel only with no damage to underlying panel Quick bit replacement. Uses Eastwood #31266 Replacement Spot Weld Bits Get rid of old spot welds by drilling them out with this high-quality tool developed by our R&D guys. The Eastwood 5/16-inch (8-mm) Spot Weld Drill makes drilling out spot welds for panel removal a less tedious and much safer job. It features an automatic bit advance feature with positive spot-weld cutting depth adjustment and a removable backing hook. The set-screw drill bit retaining design provides convenient and secure cutting bit changes. Its high-torque motor requires just 4-CFM at 90-PSI, meaning you can connect it to pretty much any shop compressor. Using a spot weld drill cutter is the fastest and easiest way to strip body panels from classic cars during the restoration process. It comes with a quick connect air fitting, one bit, a screw wrench and instructions. We also sell replacement spot well drill bits if you have a big project ahead. Watch our product video below or call our experts seven days a week for technical advice.

• Spot Weld Capacity: 1/4" & 5/16” [6 & 8mm]
• Air Consumption: 4 cfm [114 lm]
• RPM: 1,600 free speed
• Maximum Inlet Air Pressure: 90 psi [6.3 bar]
• Inlet Thread Size: 1/4” FNPT