Eastwood 51118 Features:

The Eastwood 100-lb. in.High-Flow in. Pressure Blaster helps you remove rust and paint faster. 100-lb. media capacity Large 1/2 in.-I.D. blaster hose and fittings 8'-long, heavy-wall blast hose with dead-man valve Requires just 10cfm at 90psi All-steel welded top-loading hopper and pressure gauge Bigger is better! Eastwood's in.High-Flow in. Pressure abrasive blaster features high-volume, extra-large valves, which means more air volume and more abrasive flow for faster removal of rust and paint. Built for the professional, with a sturdy welded hopper, 1/2 in. heavy-duty nozzle, heavy-wall blast hose and safety pressure-relief valve, so it's rugged, durable, and very efficient. Don't skimp with one of those low-cost units that frustrate you with clogging and sporadic media spraying. This Eastwood pressure blasting machine completely strips the average frame in less than a day, rather than weeks using other units or methods. Designed for high flow with minimal air input; a compressor producing a minimum of 10cfm at 90psi will work fine. 18.5 in.H x 12 in.W. Rolls easily to your job site. For best results and the most efficient operation, use clean, dry, 80-grit or finer abrasive media. Use of Walnut shell media is not recommended. 1-year limited warranty.

• Tank Volume: 10 gallons / 100 pounds
• Hose Length: 8 ft x 1/2" i.d.
• Working Pressure: 60-125 psi
• Air Consumption: 6-25 cfm
• Overall Dimensions: 11" x 17" x 34"
• Weight: 41 lbs.